Justin JED650, Руководство пользователя

Страница: 19 / 36

Adjusting pad effect
1. Use the direction key to switch to EFFECT
2. Press [SET UP] to enter pad effect setting.
EQ setting
3. Use the direction key to select EQ type.
4. Use the direction key to change EQ value.
HI GAIN=13(default) range:01---25
MID GAIN=15(default) range:01---25
LOW GAIN=18(default) range:01---25
DRUM PAD SETTING
PAD SENSITIVITY
RELOAD FAC SET
EFFECT
HI GAIN=13
MID GAIN=15
LOW GAIN=18
AMBIENCE=OFF
HI GAIN=13
MID GAIN=15
LOW GAIN=18
AMBIENCE=OFF
Ambience setting
RELOAD SETTING
FOR USER01
SET UP FOR YES
CANCEL FOR NO
5. Use the direction key to select AMBIENCE
6. Use the direction key to switch AMBIENCE
AMBIENCE=OFF
AMBIENCE=01
AMBIENCE=02
(When adjusting parameters, press [SET UP] to reset
parameters to the default status.) All
Go back to default setting
1. Use the direction key to select RELOAD FAC SET
2. press[SET UP]to go back to the default setting.
3. Use the direction key to select saved drum kit.
e.g.FOR USER01
4. Press [SET UP] to go back to the default setting
5. Press [CANCEL]to cancel the default setting
15
KIT01 POP01
SONG01 DRUM ON
CLICK=4/4 TEMPO=100
Instruction for pad parameter setting
1. Pad curve
The curve is relative to the pad dynamic signal.
(default:CURVE2)
CURVE 1:very low dynamic response, high volume. If used to trigger the pads,the curve is flat.
CURVE2: the standard setting, during playing or when volume changes, it generates maximum
natural signal.
CURVE3: compared to CURVE2,
weak force generates relatively big change.
CURVE4: compared to CURVE2,
strong force generates relatively big change.
CURVE5: compared to CURVE2,
strong force generates very big change.
2. Threshold
Threshold: the minimum force to generate a pad signal.
The high threshold needs strong force to generate pad signal. Low threshold needs weak force
generate pad signal. to
Setting threshold needs to refer to playing style and external condition.
Threshold range: 1---8
3. Crosstalk
If the crosstalk is too high, weak force is hard to trigger the pad. If the crosstalk is too low, it is
to lead to crosstalk. easy
4. About saving
All the changes to the preset drum kit can not be saved in the peset drum kit, but in the user
kit. drum
DEMO SONG playing
Select playing DEMO SONG
1. Press [SONG] to switch to DEMO SONG
menu or use the direction Key to select
SONG01
2. Use the direction key to Select the
preset DEMO SONG
3. Press [START/STOP]to play the
selected songs
(refer to DEMO SONG LIST for the DEMO SONG
16