jurop PN 106, Инструкция по установке, эксплуатации и обслуживанию, Страница: 4 / 40

REV
. 10
22-04-2020 INSTALLATION
,
USE AND MAINTENANCE MANUAL
–
PN
4 / 40
Jurop SpA
Via Crosera n° 50
33082 Azzano Decimo, PN (Italia)
T
EL
. +39 0434 636811 F
AX
. +39 0434 636812
http://www.jurop.it
e-mail: info@jurop.it
1.1. Introduction
• This booklet contains the necessary instructions for a correct
installation, running, use and maintenance of the pump, as well as
some practical suggestions for a safe operating.
• The knowledge of the following pages will grant a long and
trouble-free operation of the pump.
• Following the instructions below contributes to limiting pump repair
expenses by extending its duration, as well as preventing hazardous
situations, thereby increasing its reliability.
• If the pump is driven by an hydraulic motor please refer to
manufacturer's specific manual.
• It is recommended to:
- Read, understand and apply carefully the instructions before
running the pump.
- Keep the booklet at hand and have it known to all operators.
• Below is a brief description of the symbols used in this manual.
If these safety rules are not respected, operators can
be injured and the pump or oilers damaged
remarkably.
If these safety rules are not respected, the pump or
system can be damaged.
Suggestions for an environment friendly use of the
pump.
Useful information for an easy usage and
maintenance of the pump.
• The graphic representations and photographs contained in this
manual are there to illustrate the product in the parts that make it up
and in specific operating phases. Though the model shown in the
manual may differ from the one purchased, the operating principle at
the base of the illustrated operating phase is the same.
• Every PN pump has to be fitted with its own tag reporting the
following data: Model, Serial number, Year, Max speed, Max pressure.
Pic. 1.1
1.2. Spare part request
• Use only genuine spare parts for maintenance and repairs. To
order spare parts, provide the following details:
EXAMPLE:
a) The model of the pump (see pump tag) PN 45
b) The serial number of the pump (see pump tag) J90001
c) A description of the parts (see parts list) VANE
d) The quantity (see parts list) 4
e) The code number of the part (see parts list)
16016 008 00
1.3. Warranty terms and conditions
• Compliance with the installation, use and maintenance instructions
provided by this manual is crucial for the recognition of warranty
against defective parts.
1. General warnings