12
1 Preparing and using for the first time
T
Insert the CLEARYL Blue filter cartridge into the water tank,
exerting slight pressure.
T
Close the filter holder. It will click into place audibly.
E
After three months, the filter will cease to work. Set the date
on the date plate on the filter holder in the water tank.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
, the light segment on the switch lights up.
T
Place one receptacle under the coffee spout and another
under the fine foam frother.
h
T
Turn the switch to the
m
position.
FILTER RINSING
, water flows out of the fine foam
frother.
E
You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E
The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
17 oz (500 ml).
SWITCH CLOSE
appears on the display.
j
T
Turn the switch to the
o
position.
SYSTEM FILLING
, the system fills up with water.
HEATING
, the machine heats up.
RINSING
, the system is rinsed. Water flows out of the cof-
fee spout. The rinse stops automatically.
ESPRESSO
appears on the display. Your IMPRESSA is ready for use.
g
T
Turn the Rotary Switch until
FILTER -
/
NO
is displayed.
k
T
Press the Rotary Switch.
OK
appears briefly on the display.
16 °dH
E
If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
g
T
Turn the Rotary Switch to change the water hardness set-
ting, e.g. to
25 °dH
.
First-time use without filter
cartridge activation
