20
2 Preparation
E
The desired specialty coffee must be prepared within approx-
imately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All specialty coffees with ground coffee are prepared following this
model.
Example:
Proceed as follows to prepare a coffee using ground
coffee.
Precondition:
ESPRESSO
is displayed (example).
T
Place a cup under the coffee spout.
g
T
Turn the Rotary Switch until
GROUND C
is displayed.
k
T
Press the Rotary Switch.
FILL GROUND C
T
Open the cover of the filler funnel for ground coffee.
T
Place one level measuring spoon of ground coffee into the
filler funnel.
T
Close the cover of the filler funnel.
k
T
Press the Rotary Switch.
ESPRESSO
(example)
g
T
Turn the Rotary Switch until
COFFEE
is displayed.
k
T
Press the Rotary Switch.
Preparation starts.
COFFEE
, the preset amount of water
for coffee flows into the cup.
Preparation stops automatically.
COFFEE
appears on the
display.
It is easy to make permanent settings for the amount of water for all
specialty coffees according to the cup size. Adjust the amount once
as shown in the following example. Every time you prepare a drink
in the future, this amount of water will be dispensed.
The process for permanently adapting the amount of water to the
cup size is the same for all specialty coffees.
Example:
Proceed as follows to
permanently
set the amount of
water for one coffee.
Precondition:
ESPRESSO
is displayed (example).
Permanently setting the
amount of water for the
cup size
