Jura IMPRESSA C60, Инструкция по эксплуатации

Страница: 25 / 48

25
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
In the program item BUTTONS you can make individual settings
for espresso and coffee. The following permanent settings can be
made:
Product Amount Coffee strength Temperature
Espresso,
coffee Volume:
0.5 OZ
–
8.0 OZ
(25 ml – 240 ml)
MILD , NORMAL ,
STRONG , EXTRA
NORMAL , HIGH
2 cups When you prepare two drinks at once, the temperature and amount of water
selected for the single product are used for each cup.
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
coffee from
NORMAL
to
STRONG
.
Precondition:
ESPRESSO
is displayed (example).
O T Touch the P symbol for approximately 2 seconds until
RINSE appears on the display.
g T Turn the Rotary Switch until BUTTONS is displayed.
k T Press the Rotary Switch to enter the program item.
ESPRESSO
g T
Turn the Rotary Switch until COFFEE is displayed.
k T
Press the Rotary Switch.
VOLUME
g T Turn the Rotary Switch until
STRENGTH
is displayed.
k T Press the Rotary Switch to enter the program item.
NORMAL
g T Turn the Rotary Switch until
STRONG
is displayed.
Product settings
J
WARNING