Juniper SSG140, Руководство по установке и настройке оборудования

Страница: 19 / 60

Connecting the Device to a Network
„ 19
Chapter 2: Installing and Connecting the Device
3. Connect an RJ-45 cable from the port labeled 0/2 (ethernet0/2 interface) to the
external switch or router. The ethernet0/2 interface is prebound to the Untrust
security zone.
4. Connect an RJ-45 cable from the Console port using the instructions provided
in “Using a Console Connection” on page 22 for management access.
Figure 8: Basic Cabling Example
Trust
Zone
Untrust
Zone
ethernet 0/0
Console
DMZ
ethernet 0/2
ethernet 0/1
WARNING: Make sure that you do not inadvertently connect the Console, AUX, or
Ethernet ports on the device to the telephone outlet.