Juniper SRX5400, Руководство по оборудованию

Страница: 196 / 394

10.
Slide the MPC all the way into the card cage until you feel resistance.
11.
Grasp both ejector handles, and rotate them clockwise simultaneously until the MPC
is fully seated.
12.
If any of the MICs on the MPC connect to fiber-optic cable, remove the rubber safety
cap from each transceiver and cable.
WARNING: Do not look directly into a fiber-optic transceiver or into the
ends of fiber-optic cables. Fiber-optic transceivers and fiber-optic cable
connected to a transceiver emit laser light that can damage your eyes.
13.
Insert the appropriate cable into the cable connector ports on each MIC on the MPC.
Secure the cables so that they are not supporting their own weight. Place excess cable
out of the way in a neatly coiled loop, using the cable management system. Placing
fasteners on a loop helps to maintain its shape.
CAUTION: Do not let fiber-optic cable hang free from the connector. Do
not allow fastened loops of cable to dangle, which stresses the cable at
the fastening point.
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
14.
Power on the services gateway. The OK LED on the power supply faceplate should
blink, then light steadily.
15.
Verify that the MPC is functioning correctly by issuing the
show chassis fpc
and
show
chassis fpc pic-status
commands. For example:
user@host>
show chassis fpc
node0:
--------------------------------------------------------------------------
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 37 23 0 2048 19 14
1 Offline ---Offlined by cli command---
2 Online 49 37 0 1024 14 25
Bring the MPC online for the first time by using the following CLI command:
user@host> request chassis fpc slot 1 online
node0:
--------------------------------------------------------------------------
Online initiated, use "show chassis fpc" to verify
user@host> show chassis fpc
node0:
--------------------------------------------------------------------------
Temp CPU Utilization (%) Memory Utilization (%)
Copyright © 2017, Juniper Networks, Inc. 170
SRX5400 Services Gateway Hardware Guide