Juniper SRX4200, Руководство по оборудованию, Страница: 42 / 100

Unpacking the SRX4200 Services Gateway
The services gateway is shipped in a cardboard carton, secured with foam packing
material. The carton also contains an accessory box and quick-start instructions.
CAUTION: The services gateway is maximally protected inside the cardboard
carton. Do not unpack it until you are ready to begin installation.
To unpack the services gateway:
1.
Move the cardboard carton to a staging area as close to the installation site as possible,
where you have enough room to remove the components from the chassis.
2.
Open the carton.
3.
Pull out the packing material holding the services gateway in place.
4.
Verify the parts received against the inventory (packing list). The packing list specifies
the part numbers and carries a brief description of each part in your order.
5.
Save the shipping carton and packing materials in case you need to move or ship the
services gateway at a later time.
Verifying Parts Received with the SRX4200 Services Gateway
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
NOTE: The parts shipped with your services gateway can vary depending on
the configuration you ordered.
Table 23 on page 42 lists the parts and their quantities in the packing list.
Table 23: Parts List for a Fully Configured Services Gateway
Quantity Component
1 Services gateway
2 AC or DC Power supply (preinstalled)
2 AC power cord appropriate for your geographical location (only for AC
models)
Copyright © 2019, Juniper Networks, Inc. 42
SRX4200 Services Gateway Hardware Guide