Juniper SRX4200, Руководство по оборудованию

Страница: 11 / 100

About the Documentation
•
Documentation and Release Notes on page xi
• Using the Examples in This Manual on page xi
• Documentation Conventions on page xiii
•
Documentation Feedback on page xv
•
Requesting Technical Support on page xv
Documentation and Release Notes
To obtain the most current version of all Juniper Networks
®
technical documentation,
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/ .
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at
https://www.juniper.net/books .
Using the Examples in This Manual
If you want to use the examples in this manual, you can use the load merge or the load
merge relative command. These commands cause the software to merge the incoming
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a
full example . In this case, use the
load merge
command.
If the example configuration does not start at the top level of the hierarchy, the example
is a
snippet . In this case, use the load merge relative command. These procedures are
described in the following sections.
xi Copyright © 2019, Juniper Networks, Inc.