Juniper SRX4200, Руководство по оборудованию

Страница: 20 / 100

Figure 2: SRX4200 Services Gateway Front Panel LEDs
Table 4: SRX4200 Services Gateway Front Panel LEDs
Description LED
• Solid green—receiving power Power
• Solid green—operating normally
•
Solid red—critical alarm
• Hardware component failure
• Software module failure
•
Fan failure (atleast one)
• Blinking red—noncritical alarm
•
The other HA node is in the lost, disabled, or ineligible state.
• Off—the system is not receiving power
Status
• Blinking green—indicates hard disk drive (SSD) activity SSD
Management Port LEDs
The management port has two LEDs that indicate link activity and status of the
management port.
Table 5 on page 20 describes the LEDs.
Table 5: Management Port LEDs
Description LED
• Solid amber—A link is established, but there is no activity on the link.
• Blinking amber—There is link activity.
• Off—There is no link established.
Link/Activity (LED
on the left)
• Solid green—100-Mbps link is established.
•
Solid amber—1000-Mbps link is established.
• Off—There is no link established.
Speed (LED on the
right)
HA Port LEDs
Each HA port has one status LED located between the ports. Figure 3 on page 21 shows
the LEDs. The upper LED (callout 1) displays the status for the port on the right and the
Copyright © 2019, Juniper Networks, Inc. 20
SRX4200 Services Gateway Hardware Guide