manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Руководство по настройке

Juniper JUNOSE 11.2.X IP SERVICES - это продукт, который предлагает Configuration Manual для установки и настройки сетевых сервисов. Вы можете бесплатно скачать этот manual с нашего manualshive.com. Получите подробные инструкции для оптимальной работы вашей сети.

Поделиться
Скачать
background image

12.

Commercial Computer Software.

The Software is “commercial computer software” and is provided with restricted rights. Use,

duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS
227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13.

Interface Information.

To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer

with the interface information needed to achieve interoperability between the Software and another independently created program, on
payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use
such information in compliance with any applicable terms and conditions upon which Juniper makes such information available.

14.

Third Party Software.

Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products

or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement,
and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party
software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent
portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such
portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper
will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three
years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA

94089, ATTN: General Counsel. You may obtain a copy of the GPL at

http://www.gnu.org/licenses/gpl.html

, and a copy of the LGPL

at

http://www.gnu.org/licenses/lgpl.html

.

15.

Miscellaneous.

This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws

principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes
arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal
courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer
with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written
(including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an
authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained
herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing
by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity
of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the
Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de
même que tous les documents y compris tout avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that
this Agreement and all related documentation is and will be in the English language)).

v

Copyright © 2010, Juniper Networks, Inc.

Содержание JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X IP SERVICES

Q-See QSNDVR9M Remote Surveillance Manual preview
QSNDVR9M
Бренд: Q-See Страницы: 33
MACROMEDIA FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE... Manuallines preview
FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE...
Бренд: MACROMEDIA Страницы: 48
IBM E02D1LL-E - Rational Rose Enterprise Installation Manual preview
E02D1LL-E - Rational Rose Enterprise
Бренд: IBM Страницы: 46
Tektronix PhaserPrint 2.0 Configuration Manual preview
PhaserPrint 2.0
Бренд: Tektronix Страницы: 2
Apogee Maestro User Manual preview
Maestro
Бренд: Apogee Страницы: 12
TomTom Navigation app for iPhone/iPad Reference Manual preview
Navigation app for iPhone/iPad
Бренд: TomTom Страницы: 84
Mackie Stereo and Mono Side chain Compressor User Manual preview
Stereo and Mono Side chain Compressor
Бренд: Mackie Страницы: 28
Xilinx LogiCORE Endpoint v2.4 User Manual preview
LogiCORE Endpoint v2.4
Бренд: Xilinx Страницы: 172
IBM VIAVOICE 10-ADVANCED EDITION User Manual preview
VIAVOICE 10-ADVANCED EDITION
Бренд: IBM Страницы: 126
IBM VIAVOICE 10-PRO USB EDITION User Manual preview
VIAVOICE 10-PRO USB EDITION
Бренд: IBM Страницы: 160
Waves MultiRack SoundGrid V9.5 Troubleshooting Manual preview
MultiRack SoundGrid V9.5
Бренд: Waves Страницы: 35
Canon VB-M40 Administrator'S Manual preview
VB-M40
Бренд: Canon Страницы: 104
LG ZetaDisplay Installation preview
ZetaDisplay
Бренд: LG Страницы: 2
GRASS VALLEY AURORA PLAYOUT - S AND UPGRADE INSTRUCTIONS V7.1 Upgrade Instructions preview
AURORA PLAYOUT - S AND UPGRADE INSTRUCTIONS V7.1
Бренд: GRASS VALLEY Страницы: 37
Aruba Networks ArubaOS Manual preview
ArubaOS
Бренд: Aruba Networks Страницы: 19
Xerox Document Services Platform Series Getting Started Manual preview
Document Services Platform Series
Бренд: Xerox Страницы: 27
Yamaha AE051 Owner'S Manual preview
AE051
Бренд: Yamaha Страницы: 7
Symantec 10288239 - ACAD NORTON ANTISPAM 2005 User Manual preview
10288239 - ACAD NORTON ANTISPAM 2005
Бренд: Symantec Страницы: 41

Бренды по названию

Популярные бренды

Загрузить еще бренды