Juniper JUNOSE 11.2.X IP SERVICES, Руководство по настройке

Страница: 142 / 356

•
Local
•
min tx interval—Minimum transmit interval (in seconds) configured on the session
at the local end
•
min rx interval—Minimum receive interval (in seconds) configured on the session
at the local end
•
multiplier—Multiplier configured on the session at the local end
•
(Adapted)
•
min tx interval—Minimum transmit interval (in seconds) to which the session is
adapted at the local end
•
min rx interval—Minimum receive interval (in seconds) to which the session is
adapted at the local end
•
multiplier—Multiplier to which the session is adapted at the local end
•
Remote
•
min tx interval—Minimum transmit interval (in seconds) configured on the session
at the remote end
•
min rx interval—Minimum receive interval (in seconds) configured on the session
at the remote end
•
multiplier—Multiplier configured on the session at the remote end
•
Up/Down count—Number of up/down transitions that have occurred on the session
•
Local diagnostic—Reason at the local end for the last session down event
•
Remote diagnostic—Reason at the remote end for the last session down event
•
Remote heard/Remote not heard—Whether the local end is receiving packets from
the remote end
•
hears us/doesn't hear us—Whether the remote end is receiving packets from the
local end
•
Min async interval—Minimum interval (in seconds) between packets sent when in
asynchronous mode
•
min slow interval—Minimum interval (in seconds) between packets when the remote
end is first being detected
•
Echo mode—State of echo mode (enabled or disabled; active or inactive)
•
Client—Name of the client
•
desired tx—Minimum transmit interval (in seconds) requested by the client
•
required rx—Minimum required receive interval (in seconds) specified by the client
•
multiplier—Multiplier requested by the client
Copyright © 2010, Juniper Networks, Inc. 116
JunosE 11.2.x IP Services Configuration Guide