manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Руководство по настройке

Juniper JUNOSE 11.2.X IP SERVICES - это продукт, который предлагает Configuration Manual для установки и настройки сетевых сервисов. Вы можете бесплатно скачать этот manual с нашего manualshive.com. Получите подробные инструкции для оптимальной работы вашей сети.

Поделиться
Скачать
background image

Authentication

The home agent authenticates the requests based on RFC 3344—IP Mobility Support
for IPv4 (August 2002). The mobile home authentication is verified and the authentication
algorithm and key are retrieved by checking the security association indexed by the
security parameter index (SPI) value. This verification results in a 128-bit key and the
authentication algorithm with which to compute an MD-5 message digest over the
registration request. The Mobile IP home agent supports both HMAC-MD5 and keyed-MD5
authentication algorithms. When the result of this computation matches the 128-bit
authenticator, the mobile-home extension is authenticated.

If a security association is configured for the foreign agent, the foreign-home
authentication extension is verified; otherwise, authentication success is based only on
the mobile-home authenticator.

The home agent checks the identification (ID) field used for matching registration requests
with response and protection against replay attacks. The home agent uses
timestamp-based replay protection and the ID field represents a 64-bit Network Time
Protocol (NTP)-formatted time value. By default, the timestamp must be within 7 seconds
of the home agent configured time value.

AAA

You can store the security associations and configuration information remotely on a
RADIUS server. You can use the

ip mobile secure host

command and the

ip mobile

secure foreign-agent

command to configure the security association (MD-5 key) for a

specified user, or for a group of users (also known as a domain) for the home agent. The
home agent can configure the security association (MD-5 key) for a specified user or a
group of users (domain).

Authentication is accomplished either by generating an authentication, authorization,
and accounting (AAA) access-request or querying the locally configured security
parameters, depending on whether or not you use the

aaa

keyword when you issue the

ip mobile host

command to configure the mobile node. For AAA authentication, you

must include the

aaa

keyword; for local authentication, do not include the

aaa

keyword.

If AAA authentication is enabled, AAA queries the security information from the RADIUS
server.

When both the network access identifier (NAI) and IP address of the mobile node are
present in the registration request, then the authentication request from Mobile IP to
AAA has the NAI as the user name and the IP address as the hint IP address. If only the
NAI is present in the registration request, then the NAI address is used as the user name
with no hint IP address in the authentication request. If only the IP address (home address)
is present in the registration request, then it is used as both the user name and the hint
IP address in the authentication request. If both the NAI address and the IP address are
missing from the registration request, then the registration request is rejected.

If the optional

aaa

keyword is present in the

ip mobile host

command, then the

authentication parameters are obtained by querying AAA. The authentication algorithm
and security key are retrieved by AAA based on its configuration, depending on the SPI
provided in the registration request. If the

aaa

keyword is absent, then the home agent

uses authentication parameters configured locally on the router to authenticate the

305

Copyright © 2010, Juniper Networks, Inc.

Chapter 13: Configuring the Mobile IP Home Agent

Содержание JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X IP SERVICES

Xerox DocuColor 45054549 User Addendum preview
DocuColor 45054549
Бренд: Xerox Страницы: 30
Waves API 550 User Manual preview
API 550
Бренд: Waves Страницы: 20
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Бренд: Red Hat Страницы: 14
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Бренд: Better Edge technology Страницы: 121
ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - Installation Manual preview
BACKUP AND RECOVERY 10 SERVER FOR LINUX -
Бренд: ACRONIS Страницы: 14
ACRONIS Backup & Recovery 10 Advanced Editions Quick Start Manual preview
Backup & Recovery 10 Advanced Editions
Бренд: ACRONIS Страницы: 10
Ulead COOL 3D User Manual preview
COOL 3D
Бренд: Ulead Страницы: 100
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Бренд: Red Hat Страницы: 78
Sierra Wireless Writing an embedded application loader Application Note preview
Writing an embedded application loader
Бренд: Sierra Wireless Страницы: 9
Sierra Wireless IP Manager Configuration Manual preview
IP Manager
Бренд: Sierra Wireless Страницы: 16
F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE Deployment Manual preview
ANTI-VIRUS - FOR MICROSOFT EXCHANGE
Бренд: F-SECURE Страницы: 115
Adaptec 1210SA - Serial ATA RAID Controller User Manual preview
1210SA - Serial ATA RAID Controller
Бренд: Adaptec Страницы: 88
GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Installation Manual preview
AURORA EDIT - INSTALLATION V7.1
Бренд: GRASS VALLEY Страницы: 152
Baby Lock Ellisimo Gold II Instruction And Reference Manual preview
Ellisimo Gold II
Бренд: Baby Lock Страницы: 50
IBM Keyboard Optimizer User Manual preview
Keyboard Optimizer
Бренд: IBM Страницы: 5
Ulead PYRO1394WebCam User Manual preview
PYRO1394WebCam
Бренд: Ulead Страницы: 24
MACROMEDIA FLEX-FLEX BUILDER Tutorial preview
FLEX-FLEX BUILDER
Бренд: MACROMEDIA Страницы: 56
Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual preview
ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5
Бренд: Novell Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды