manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Руководство по настройке

Juniper JUNOSE 11.2.X IP SERVICES - это продукт, который предлагает Configuration Manual для установки и настройки сетевых сервисов. Вы можете бесплатно скачать этот manual с нашего manualshive.com. Получите подробные инструкции для оптимальной работы вашей сети.

Поделиться
Скачать
background image

END USER LICENSE AGREEMENT

READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE.

BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS
CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO
BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED
HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS
REGARDING LICENSE TERMS.

1.

The Parties.

The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or

Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred
to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable
license(s) for use of the Software (“Customer”) (collectively, the “Parties”).

2.

The Software.

In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, for

which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by
Juniper in equipment which Customer purchased from Juniper or an authorized Juniper reseller. “Software” also includes updates, upgrades
and new releases of such software. “Embedded Software” means Software which Juniper has embedded in or loaded onto the Juniper
equipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto the equipment.

3.

License Grant.

Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer

a non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the
following use restrictions:

a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by
Customer from Juniper or an authorized Juniper reseller.

b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units
for which Customer has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access
Client software only, Customer shall use such Software on a single computer containing a single physical random access memory space
and containing any number of processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines
(e.g., Solaris zones) requires multiple licenses, regardless of whether such computers or virtualizations are physically contained on a single
chassis.

c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may
specify limits to Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent
users, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of
separate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput,
performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limits may restrict the use
of the Software to managing certain kinds of networks or require the Software to be used only in conjunction with other specific Software.
Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable licenses.

d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the
Software. Customer may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not
extend or create an additional trial period by re-installing the Software after the 30-day trial period.

e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s
enterprise network. Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the
Steel-Belted Radius software to support any commercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase
the applicable license(s) for the Software from Juniper or an authorized Juniper reseller.

4.

Use Prohibitions.

Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees

not to and shall not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized
copies of the Software (except as necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the
Software, in any form, to any third party; (d) remove any proprietary notices, labels, or marks on or in any copy of the Software or any product
in which the Software is embedded; (e) distribute any copy of the Software to any third party, including as may be embedded in Juniper
equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted feature, function, service, application, operation, or capability
without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, service, application,
operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper to any third party; (h) use the

iii

Copyright © 2010, Juniper Networks, Inc.

Содержание JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X IP SERVICES

DAVIS and Vantage Pro Getting Started Manual preview
and Vantage Pro
Бренд: DAVIS Страницы: 16
TANDBERG Compliance Appliance Deployment Manual preview
Compliance Appliance
Бренд: TANDBERG Страницы: 41
ALK CoPilot CoPilot Live Smartphone User Manual preview
CoPilot CoPilot Live Smartphone
Бренд: ALK Страницы: 42
Campbell PC400 User Manual preview
PC400
Бренд: Campbell Страницы: 250
Sony MSSW-IC2 User Manual preview
MSSW-IC2
Бренд: Sony Страницы: 2
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Supplementary Manual preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Бренд: Sony Страницы: 1
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Specifications preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Бренд: Sony Страницы: 2
Sony ICD-BP150 - Ic Recorder Specifications preview
ICD-BP150 - Ic Recorder
Бренд: Sony Страницы: 2
Sony D-NS921F - Portable Cd Player Specifications preview
D-NS921F - Portable Cd Player
Бренд: Sony Страницы: 2
Sony MS Export User Manual preview
MS Export
Бренд: Sony Страницы: 9
Sony Music Box v.2.1.0 Manual preview
Music Box v.2.1.0
Бренд: Sony Страницы: 12
Sony Memory Stick Autorun v1.3 Operating Instructions Manual preview
Memory Stick Autorun v1.3
Бренд: Sony Страницы: 24
Sony ICD-R100 Operating Instructions (primary manual) Service Manual preview
ICD-R100 Operating Instructions (primary manual)
Бренд: Sony Страницы: 22
Sony ICD-BP100 - Ic Recorder Service Manual preview
ICD-BP100 - Ic Recorder
Бренд: Sony Страницы: 32
Sony Image Converter 2 Plus Operating Instructions Manual preview
Image Converter 2 Plus
Бренд: Sony Страницы: 40
Sony Emma User Manual preview
Emma
Бренд: Sony Страницы: 34
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Service Manual preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Бренд: Sony Страницы: 44
Sony ICD-BP100 - Ic Recorder Operating Instructions Manual preview
ICD-BP100 - Ic Recorder
Бренд: Sony Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды