manualshive.com logo in svg

Juniper JUNOSE 11.2.X IP SERVICES, Руководство по настройке

Juniper JUNOSE 11.2.X IP SERVICES - это продукт, который предлагает Configuration Manual для установки и настройки сетевых сервисов. Вы можете бесплатно скачать этот manual с нашего manualshive.com. Получите подробные инструкции для оптимальной работы вашей сети.

Поделиться
Скачать
background image

registration request. In both cases, if security parameters are not retrieved, then the
request for mobility service is rejected, a security violation error is logged, and no
registration reply is generated.

When you configure the mobile host to use RADIUS authentication for home agent users
by including the

aaa

keyword in the

ip mobile host

command, the Mobile IP home agent

application generates a RADIUS access-request message. The RADIUS server then uses
Juniper Networks vendor-specific attributes (VSAs) to provide the appropriate
authentication algorithm and secure key for the authentication request.

For information about the specific Juniper Networks VSAs used for Mobile IP
RADIUS-based authentication, see

JunosE Broadband Access Configuration Guide

and

RADIUS IETF Attributes

Subscriber Management

The Mobile IP home agent interoperates with the subscriber management application
on E Series routers. The subscriber management application enables customers to
dynamically provision new IP subscribers and quickly create new value-added services.

You can set up your subscriber management environment to create dynamic IP subscriber
interfaces to provision subscribers and provide differentiated service delivery. In this
configuration, the service parameters for an IP subscriber are bound to a dynamic IP
subscriber interface.

During the registration process when the Mobile IP home agent has authenticated the
subscriber with AAA, the home agent locates or creates the appropriate IP tunnel to carry
the data traffic to the foreign agent. When Mobile IP obtains all of the parameters required
for interface creation, including the tunnel ID and the authentication context, it directs
the subscriber management application to create the dynamic IP subscriber interface.

During the re-registration process when there is a handoff from an initial Mobile IP foreign
agent to a new Mobile IP foreign agent, the home agent reauthenticates the subscriber
with AAA and locates or creates the appropriate IP tunnel to carry the data traffic to the
new foreign agent. When Mobile IP obtains all of the parameters required for interface
creation, it directs the subscriber management application to move the dynamic IP
subscriber interface from the initial tunnel for the previous foreign agent to the new tunnel
that points to the new foreign agent. If this was the last subscriber on the tunnel for the
previous foreign agent, then the home agent directs the IP tunneling application to tear
down the initial tunnel.

For more information about subscriber management and dynamic IP subscriber interfaces,
see

JunosE Broadband Access Configuration Guide

. For more information about dynamic

IP subscriber interfaces, see

JunosE Broadband Access Configuration Guide

.

Mobile IP Routing and Forwarding

The home agent supports both generic routing encapsulation (GRE) and Distance Vector
Multicast Routing Protocol (DVMRP, also known as IP-in-IP) tunnel encapsulation for
forward and reverse tunneling. When packets destined for the mobile node reach a home
agent, the home agent encapsulates the packets and tunnels them to the CoA. Packets
that exceed the maximum transmission unit (MTU) value of the tunnel are dropped and

Copyright © 2010, Juniper Networks, Inc.

306

JunosE 11.2.x IP Services Configuration Guide

Содержание JUNOSE 11.2.X IP SERVICES





































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSE 11.2.X IP SERVICES

IBM NetVista Special Instructions Manual preview
NetVista
Бренд: IBM Страницы: 34
Raymarine RayTech RNS 5.0 User Manual preview
RayTech RNS 5.0
Бренд: Raymarine Страницы: 152
Novell DATA SYNCHRONIZER - UPDATE 1 Installation Manual preview
DATA SYNCHRONIZER - UPDATE 1
Бренд: Novell Страницы: 9
deXlan TV Expert User Manual preview
TV Expert
Бренд: deXlan Страницы: 17
Panasonic LightPen3 Operating Instructions Manual preview
LightPen3
Бренд: Panasonic Страницы: 27
Panasonic LUMIX Simple Viewer Operating Instructions Manual preview
LUMIX Simple Viewer
Бренд: Panasonic Страницы: 32
ARRI Laptop Camera Controller flex LCC Basics Manual preview
Laptop Camera Controller flex LCC
Бренд: ARRI Страницы: 10
Ulead DVD MOVIEFACTORY 3 User Manual preview
DVD MOVIEFACTORY 3
Бренд: Ulead Страницы: 78
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Бренд: Red Hat Страницы: 78
R&S SMW-K555 User Manual preview
SMW-K555
Бренд: R&S Страницы: 45
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Бренд: F-SECURE Страницы: 174
AMX AXD-CP4/A Specifications preview
AXD-CP4/A
Бренд: AMX Страницы: 3
Bay Networks Baystream 7 Notice preview
Baystream 7
Бренд: Bay Networks Страницы: 140
ADB Liberty ME 1243 Quick Start Manual preview
Liberty ME 1243
Бренд: ADB Страницы: 68
Native Instruments Reaktor Prism Manual preview
Reaktor Prism
Бренд: Native Instruments Страницы: 58
IBM TIVOLI SC23-8765-00 User Manual preview
TIVOLI SC23-8765-00
Бренд: IBM Страницы: 74
TC Electronic PowerCore Master X3 Product Manual preview
PowerCore Master X3
Бренд: TC Electronic Страницы: 11
Lenovo ThinkPad Edge 11 Hardware Maintenance Manual preview
ThinkPad Edge 11
Бренд: Lenovo Страницы: 130

Бренды по названию

Популярные бренды

Загрузить еще бренды