background image

1

Owner’s Manual

Owner’s Manual

Owner’s Manual

VINTAGE STOMP PACKAGE

VINTAGE STOMP PACKAGE

VINTAGE STOMP PACKAGE

What Are ADD-ON EFFECTS?

ADD-ON EFFECTS are software packages that install additional high-quality effects programs on digital 
consoles. 

What is the Vintage Stomp Package?

Vintage Stomp is one of the ADD-ON EFFECTS packages. 
It simulates the characteristics of analog phasers from the 1970s. 
It offers three program types that you can use to match your purposes: Max100, Vintage Phaser, and Dual Phaser. 
Max100 is a model that reproduces vintage effects manufactured only during the second half of the Seventies. 
Dual Phaser is a model that reproduces vintage effects manufactured only during the mid-Seventies. The Vintage Phaser does 
not limit itself to reproducing any particular model. Instead, it offers an extremely high level of freedom in creating the sounds 
expected from phasers. 

What is VCM (Virtual Circuitry Modeling)?

VCM is a technology that enables you to model element levels in analog circuits (such as resistors and
capacitors). This technology was developed by an engineering group led by Mr. Kunimoto, an engineer 
who developed the first physical modeling synthesizers, VL1 and VP1. 
Vintage Stomp utilizes VCM technology.

Special Note

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.

• The software and this Owner’s Manual are exclusive copyrights of Yamaha Corporation. 

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of 

the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for 

the results of the use of this manual and the software. 

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens 

which appear on your computer. 

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.

© 2005 Yamaha Corporation. All rights reserved.

Содержание AE051








Отзывы: