Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Руководство по настройке

Страница: 386 / 398

host1# show qos-parameter references gigabitEthernet 6/0 explicit
Meaning
Table 56 on page 354 lists the show qos-parameter command output fields.
Table 56: show qos-parameter Output Fields
Field Description Field Name
Location of the interface to which the parameter
instance is assigned; global indicates that the
parameter is assigned to the chassis interface
Name of the parameter instance parameter name
Value assigned to the parameter instance value
Source of the parameter instance:
■
dcm—Parameter instance was created in a
profile
■
radius—Parameter instance was created through
RADIUS
■
service manager—Parameter instance was
created through Service Manager
■
default—Parameter instance was created
through the CLI or SNMP
source
Number of references of this parameter instance
created through Service Manager service manager refs
Status of the persistence of a parameter instance in
the system:
■
persistent—Parameter instance is stored in NVS
and is restored after a chassis reset
■
non-persistent—Parameter instance is not stored
in NVS and are deleted after a chassis reset
persistence
Number of parameter instances assigned to the
chassis Global parameter instances
Total number of parameter instances assigned Parameter instances reported
Total number of explicit parameter instances assigned Explicit parameter instances
Total number of hierarchical parameter instances
assigned Hierarchical parameter instances
Total number of parameter instances associated with
the IP multicast bandwidth adjustment application IP multicast parameter instances
Related Topics
Creating Parameter Instances
■
■
show qos-parameter
354 ■
Monitoring QoS Parameter Instances
JUNOSe 11.1.x Quality of Service Configuration Guide