Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Руководство по настройке

Страница: 363 / 398

control name value units
-------------------- ------- ---------------
maximum voql 400 milliseconds
reaction factor 75 percent
convergence factor 50 percent
minimum dynamic rate 0 percent
Meaning
Table 42 on page 331 lists the show qos shared-shaper-control command output
fields.
Table 42: show qos shared-shaper-control Output Fields
Field Description Field Name
Name of the simple shared shaper control control name
Value of the simple shared shaper control; default
values are displayed if none specified control value
Expressed units for the value of the simple shared
shaper control units
Related Topics
Configuring Simple Shared Shaper Algorithm Variables on page 93
■
■
show qos-shared-shaper-control
Monitoring Forwarding and Drop Events on the Egress Queue
Purpose
Display information about forwarding and drop event counts on the egress queue.
Action
To display events for a specific interface:
host1# show egress-queue events interface gigabitEthernet 1/0
committed conformed exceeded rate
traffic forwarded drop drop drop period
interface class events events events events count
---------------------- ------- --------- --------- --------- --------- ---------
ip GigabitEthernet1/0 tc1 132 0 0 0 132
tc2 132 132 0 0 132
tc3 6 0 132 0 132
tc4 0 0 0 132 132
To display events for an L2TP session:
host1# show egress-queue events l2tp-session session1
To display events for a tunnel interface, specify the interface at the root of the
scheduler hierarchy located on the tunnel-service interface or at the same hierarchy
for LNS GRE tunnel traffic:
Monitoring Forwarding and Drop Events on the Egress Queue
■ 331
Chapter 31: Monitoring QoS on E Series Routers