Creating a QoS Interface Hierarchy for Bulk-Configured VLAN Subinterfaces with
RADIUS
Bulk-configured VLAN subinterfaces are created dynamically, so you cannot apply a
QoS profile directly to a VLAN subinterface. Instead, you can use subscriber service
profiles and RADIUS to apply QoS profiles.
To create an interface hierarchy for bulk-configured VLAN subinterfaces:
1.
Configure the bulk-configured VLAN subinterface.
host1(config)#
interface gigabitEthernet 6/0/0
host1(config-if)#
encapsulation vlan
host1(config-if)#
auto-configure vlan
host1(config-if)#
vlan bulk-config BulkConfig
host1(config-if)#
profile vlan bulk-config BulkConfig vlanBulkProfile
host1(config-if)#
vlan bulk-config BulkConfig vlan-range 1 3600
2.
Configure the profiles and service profile for the bulk-configured VLAN
subinterfaces and the IP upper-layer encapsulation.
host1(config-if)#
profile vlanBulkProfile
host1(config-profile)#
vlan auto-configure ip
host1(config-profile)#
vlan profile ip ipProfile
host1(config-profile)#
vlan service-profile vlanServiceProfile
host1(config-profile)#
exit
host1(config-profile)#
profile ipProfile
host1(config-profile)#
ip unnumbered loopback 0
host1(config-profile)#
exit
3.
Configure an IP service profile.
host1(config)#
ip service-profile vlanServiceProfile
host1(config-service-profile)#
user-name "vlan@test"
host1(config-service-profile)#
password 56789
host1(config-service-profile)#
exit
TIP:
Configure the service profile in the default virtual router or the virtual router in
which RADIUS is configured.
4.
Access the RADIUS server and assign values for the RADIUS attributes necessary
for creating a QoS interface hierarchy, including the QoS profile name. For
example:
■
Juniper VSA Qos-Profile-Name [26-26]—QoS profile name
■
(Optional) Juniper VSA Virtual-Router [26-1]—Virtual router name
■
(Optional) IETF VSA [22]—Framed-Route
5.
Verify that the attributes are being used by RADIUS.
180
■
Creating a QoS Interface Hierarchy for Bulk-Configured VLAN Subinterfaces with RADIUS
JUNOSe 11.1.x Quality of Service Configuration Guide
Содержание JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010
