host1(config-qos-parameter-define)#
controlled-interface-type vlan
host1(config-qos-parameter-define)#
controlled-interface-type ip
c.
Configure an instance-interface type.
host1(config-qos-parameter-define)#
instance-interface-type vlan
3.
Do one of the following:
■
Configure the shaping mode by issuing the
qos-shaping-mode
command.
Frame shaping mode is the default for Ethernet interfaces on all E Series
routers. You can only set the cell shaping mode for Gigabit Ethernet and
10-Gigabit Ethernet interfaces configured on the GE-2 line module, the
GE-HDE line module, and the ES2 4G LM.
■
Configure the shaping mode by specifying the QoS cell mode application
with a parameter definition.
host1(config)#
qos-parameter-define cell-mode application qos-cell-mode
4.
Attach the parameter definition to a logical Ethernet interface.
In this example, parameter instances are created for both the byte adjustment
and QoS cell mode applications.
host1(config)#
interface gigabitEthernet 7/0
host1(config-if)#
encapsulation vlan
host1(config-if)#
exit
host1(config)#
interface gigabitEthernet 7/0.1
host1(config-if)#
vlan id 1
host1(config-if)#
qos-parameter byteadjustment -16
host1(config-if)#
qos-parameter cell-mode 1
host1(config-if)#
ip address 1.1.1.1 255.255.255.0
Related Topics
■
Byte Adjustment for ADSL and VDSL Traffic Overview on page 293
■
Guidelines for Configuring Byte Adjustment of Cell and Frame Shaping Rates
Using QoS Parameters on page 296
■
Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment
for Cell Shaping on page 286
■
For information about managing packet fragmentation for traffic with frame
shaping mode, see Configuring a Parameter Definition to Adjust Frame Shaping
Rates for VDSL Traffic on page 299
■
For more information about configuring shaping modes for Ethernet, see QoS
Shaping Mode for Ethernet Interfaces Overview on page 178 and Cell Shaping
Mode Using QoS Parameters Overview on page 281
■
controlled-interface-type
■
encapsulation vlan
■
instance-interface-type
■
ip address
298
■
Configuring a Parameter Definition to Adjust Cell Shaping Rates for ADSL Traffic
JUNOSe 11.1.x Quality of Service Configuration Guide
Содержание JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010
