Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010, Руководство по настройке

Страница: 368 / 398

Table 44: show egress-queue rates Output Fields (continued)
Field Description Field Name
Name of the traffic class traffic class
Statistics for the rate at which packets are enqueued.
In some time periods, the enqueue rate might exceed
the dequeue rate. This can occur when a burst of
traffic arrives at a queue which might be dequeuing
at a slower rate because of a shaper or congestion.
In other time periods, the enqueue rate might be less
than the dequeue rate. This can occur when a
buffered burst of packets are being dequeued, and
no new packets are arriving at the queue.
forwarded rate
Total number of all drop rates aggregate drop rate
Drop rate for green packets committed drop rate
Drop rate for yellow packets conformed drop rate
Drop rate for red packets exceeded drop rate
Minimum rate for queue minimum rate
Maximum rate for queue maximum rate
Number of queues reported Queues reported
Number of queues not reported because they are
under the threshold Queues filtered (under threshold)
Number of queues not displayed because statistics
gathering is disabled (that is, the referenced statistics
profile does not have a rate period set) Queues disabled (no rate period)
Number of queues not displayed because no
resources were available Queues disabled (no resources)
Total number of queues within the hierarchical scope
of the command Total queues
Related Topics
Configuring Rate Statistics on page 39
■
■
For more information about the assured rate, see Configuring an Assured Rate
for a Scheduler Node or Queue on page 55
■
show egress-queue rates
336 ■
Monitoring Forwarding and Drop Rates on the Egress Queue
JUNOSe 11.1.x Quality of Service Configuration Guide