host1(config)#
qos-parameter-define downstreamVLAN application
qos-downstream-rate
b.
Configure controlled-interface types.
host1(config-qos-parameter-define)#
controlled-interface-type vlan
host1(config-qos-parameter-define)#
controlled-interface-type ip
c.
Configure subscriber-interface types.
host1(config-qos-parameter-define)#
subscriber-interface-type vlan
3.
Do one of the following:
■
For VLANs, configure the shaping mode by creating a parameter definition
with the QoS cell mode application. Ensure that you specify a
subscriber-interface type.
See “Configuring a Parameter Definition to Shape Ethernet Traffic Using Cell
Mode” on page 284.
■
For ATM VCs, configure the shaping mode by issuing the
qos-shaping-mode
command.
See “Configuring the QoS Shaping Mode for ATM Interfaces” on page 174.
4.
Enable QoS adaptive mode for the system by issuing the
qos-adaptive-mode
command in L2C Configuration mode.
host1(config)#
l2c
host1(config-l2c)#
qos-adaptive-mode
5.
Enable the QoS downstream rate application to use downstream rates obtained
from the Actual-Data-Rate-Downstream [26-130] DSL Forum VSA.
host1(config)#
aaa qos downstream-rate
6.
Configure the scheduler profile for the shaping rate.
host1(config)#
scheduler-profile vlan1
host1(config-scheduler-profile)#
shared-shaping-rate downstreamVLAN * 5 auto
7.
Configure the QoS profile for the shaping rate.
host1(config)#
qos-profile vlan1
host1(config-qos-profile)#
vlan node scheduler-profile vlan1
8.
Attach the QoS profile to a logical Ethernet interface.
ANCP or AAA dynamically creates the parameter instances for the QoS
downstream rate application, and if applicable, the QoS cell mode application;
therefore, you do not need to specify them.
host1(config)#
interface gigabitEthernet 6/0/2
host1(config-if)#
encapsulation vlan
host1(config-if)#
interface gigabitEthernet 6/0/2.1
host1(config-if)#
vlan id 1
host1(config-if)#
qos-profile vlan1
304
■
Configuring a Parameter Definition for QoS Downstream Rate
JUNOSe 11.1.x Quality of Service Configuration Guide
Содержание JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010
