Configuring Traffic
Classes
The QoS administrator configures the traffic classes and traffic-class groups for video
and voice services.
1.
Configure the traffic class named voice.
host1(config)#
traffic-class voice
host1(config-traffic-class)#
exit
2.
Configure the traffic class named video.
host1(config)#
traffic-class video
host1(config-traffic-class)#
exit
Configuring the QoS
Parameter Definition
The QoS administrator configures a parameter definition and the byte adjustment
application. The QoS administrator then enables the QoS client to create a parameter
instance of the byte adjustment from VLAN interfaces. All interfaces above the VLAN
use the same byte adjustment value.
1.
Configure a parameter definition named byte-adjustment.
host1(config)#
qos-parameter-define byte-adjustment application
qos-byte-adjustment
2.
Define the controlled-interface types for vlan and ip to adjust the shaping rate
for the VLAN and IP queues.
a.
Configure the controlled-interface type for VLAN.
b.
Configure the controlled-interface type for IP.
host1(config-qos-parameter-define)#
controlled-interface-type vlan
host1(config-qos-parameter-define)#
controlled-interface-type ip
host1(config-qos-parameter-define)#
exit
Configuring the QoS
Shaping Mode
The QoS administrator then configures the QoS shaping mode using the QoS cell
mode application. When you configure the QoS shaping mode to cell mode on port
0 of the IOA, all ports on the IOA use the same value.
1.
Configure a parameter definition named cell-mode.
host1(config)#
qos-parameter-define cell-mode application qos-cell-mode
2.
Define the controlled-interface types for vlan and ip for the shaping mode.
host1(config-qos-parameter-define)#
controlled-interface-type vlan
host1(config-qos-parameter-define)#
controlled-interface-type ip
host1(config-qos-parameter-define)#
exit
Reference the
Parameter Definition
The QoS administrator configures the shaping rate and the shared-shaping rate within
scheduler profiles for the subscribers at VC1 and VC2.
Within a Scheduler
Profile
1.
Configure the scheduler profile for the subscriber VC1.
a.
Configure the scheduler profile named vc1.
Example: QoS Parameter Configuration for QoS Cell Mode and Byte Adjustment for Cell Shaping
■
287
Chapter 28: Configuring the Shaping Mode for Ethernet with QoS Parameters
Содержание JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010
