JUNOSe 10.2.2 Release Notes
56
Errata
The
ERX Module Guide, Appendix A, Module Protocol Support
incorrectly states
that IPv6 multicast is supported on the following line modules:
cOCx FO line module with cOC3/STM1 modules
cOCx FO line module with cOC12/STM4 FO I/O modules
COCx-F3 line modules with CT3/T3 12 I/O modules
OCx/STMx ATM line modules with 4xDS3 ATM I/O modules
CT3/T3-FO line modules with CT3/T3 12 I/O modules
The
ERX Module Guide
fails to include a
Module Name Cross-Reference
Information
appendix. See
Appendix B, Module Name Cross-Reference
Information,
in these Release Notes
for a single table that lists the module label
name, software display name, and the model number for each module for ERX
routers.
In the
E120 and E320 Module Guide
, the Cables and connectors (multimode
[SX]) row in the tables for the GE-4 IOA, GE-8 IOA, and GE-20 IOA erroneously
states that the maximum transmit power is -4dBm. In fact, the maximum
transmit power for these IOAs with multimode cable is -3dBm.
The
E120 and E320 Module Guide, Appendix A, IOA Protocol Support
incorrectly
states that IPv6 multicast is supported on the ES2-S1 Service IOA module. IPv6
multicast is not supported on this module.
In
JUNOSe System Basics Configuration Guide, Chapter 4, Configuring SNMP
, the
Monitoring Interface Tables
section contains a topic whose heading is incorrect.
Although the title of that section is
show snmp group
, the information described
in it relates to the
show snmp interfaces
command.
The correct heading for that section is
show snmp interfaces
. The field
descriptions and usage guidelines for the
show snmp group
command are
available in a separate section under the
Viewing SNMP Status
main section of
the same chapter.
In
JUNOSe System Basics Configuration Guide, Chapter 8
,
Configuring a Unified
In-Service Software Upgrade,
the DHCP Relay Server row in the Application
Support for Unified In-Service Software Upgrades table is incorrectly marked as
unsupported for the unified ISSU operation. DHCP relay has supported unified
ISSU since JUNOSe Release 9.2.0.
The
DHCP Affected Behaviors
section in
JUNOSe System Basics Configuration
Guide, Chapter 8
,
Configuring a Unified In-Service Software Upgrade,
incorrectly
contains the
DHCP Relay and DHCP Relay Proxy Prevent Unified ISSU
section,
which indicates that the DHCP relay and DHCP relay proxy applications do not
support unified ISSU.