Juniper JUNOSe 10.2.2 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 118

background image

JUNOSe 10.2.2 Release Notes

22

Known Behavior

IP

When you upgrade from certain releases to JUNOSe Release 9.2.0p1-0 or
higher-numbered releases, descriptions configured for IP interfaces or IP
subinterfaces are not retained across the upgrade when the descriptions are
shorter than 9 characters in length. Additionally, VRF descriptions are not
retained across the upgrade when the combined length of the VRF description
and the VRF name is shorter than 9 characters. This behavior is seen during
upgrades using a reload, stateful SRP switchover, or unified ISSU. Upgrades
from the following releases are affected by this behavior:

7.x.x

8.0.x

8.1.x, 8.2.x, and 9.x.x builds created before July 23, 2008

Examples of descriptions that are not retained across the upgrade:

host1(config-if)#

ip description 12345678

host1(config)#

ip vrf 123

host1(config-vrf)#

description 45678

Examples of descriptions that are retained across the upgrade:

host1(config-if)#

ip description longdescription

host1(config)#

ip vrf longername

host1(config-vrf)#

description 45678

host1(config)#

ip vrf 123

host1(config-vrf)#

description longdescription

Work-around:

Before you upgrade from an affected release to JUNOSe Release

9.2.0p1-0 or higher-numbered releases, ensure that you do the following:

Change IP interface and subinterface descriptions to 9 or more characters.

Change VRF descriptions, VRF names, or both so that the combination of
associated VRF names and descriptions consists of 9 or more characters.

If you have enabled ipInterface logging at a priority of debug, the
acknowledgment that an interface has been deleted from the line modules can
return to the SRP module after the layers beneath IP have deleted their
interfaces. Consequently, the original name of the interface cannot be resolved
or displayed in the log, and the system instead displays the ifIndex of the IP
interface. This behavior has no functional effect other than that the log is
misleading. However, previous log events indicate that the interface deletion
was beginning.

The

ip tcp adjust-mss

command, which modifies the maximum segment size

for TCP SYN packets traveling through the interface, is not supported on the
ES2 10G LM or ES2 10G Uplink LM.

«
...
28
29
30
31
32
...
»

Содержание JUNOSe 10.2.2























































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSe 10.2.2

850DP - Phaser Color Solid Ink Printer

Бренд: Xerox Страницы: 2

UNIVERSAL CONTROL 1.1 SVN 2108

Бренд: PRESONUS Страницы: 1

Бренд: AMD Страницы: 120

Integrated Fiery Color Server

Бренд: Xerox Страницы: 24

Бренд: Olympus Страницы: 149

Бренд: I-Data Страницы: 79

CoPilot CoPilot Live Smartphone

Бренд: ALK Страницы: 42

Бренд: Valgrind Страницы: 319

Бренд: Bosch Страницы: 40

Divar Archive Player

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 86

DINION IP 5000 MP

Бренд: Bosch Страницы: 112

Бренд: Spectrel Страницы: 74

PCANYWHERE - V12.1

Бренд: Symantec Страницы: 321

Бренд: Cpanel Страницы: 221

9235 - Coolscan III

Бренд: Nikon Страницы: 153

Бренд: TROY Group Страницы: 10

Бренд: Altigen Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды