Juniper JUNOS 10.2, Руководство по модернизации

Страница: 89 / 96

Action
From the CLI, enter the
show system license
command.
Sample Output
user@router> show system license
License usage:
Licenses Licenses Licenses Expiry
Feature name used installed needed
subscriber-acct 0 1 0 permanent
subscriber-auth 0 1 0 permanent
subscriber-addr 0 1 0 permanent
subscriber-vlan 0 1 0 permanent
subscriber-ip 0 1 0 permanent
scale-subscriber 0 1000 0 permanent
scale-l2tp 0 1000 0 permanent
scale-mobile-ip 0 1000 0 permanent
Licenses installed:
License identifier: E000185416
License version: 2
Features:
subscriber-acct - Per Subscriber Radius Accounting
permanent
subscriber-auth - Per Subscriber Radius Authentication
permanent
subscriber-addr - Address Pool Assignment
permanent
subscriber-vlan - Dynamic Auto-sensed Vlan
permanent
subscriber-ip - Dynamic and Static IP
permanent
Meaning
The output shows a list of the license usage and a list of the licenses installed on the
router. Verify the following information:
■
Each license is present. Licenses are listed in ascending alphanumeric order by
license ID.
■
The state of each license is
permanent
.
NOTE: A state of invalid indicates that the license key is not a valid license key. Either
it was entered incorrectly or it is not valid for the specific device.
■
The feature for each license is the expected feature. The features enabled are
listed by license. An all-inclusive license has
All features listed.
■
All configured features have the required licenses installed. The
Licenses needed
column must show that no licenses are required.
Displaying License Usage
Purpose
Verify that the licenses fully cover the feature configuration on the router.
Action
From the CLI, enter the show system license usage command.
Displaying License Usage
■ 67
Chapter 7: Managing JUNOS Software Licenses