Juniper JUNOS 10.2, Руководство по модернизации

Страница: 79 / 96

Copy Saved Files to the Router
To copy the saved configuration to the router:
1. Log in to the console as root . There is no password.
Escape character is '^]'.
[Enter]
router (ttyd0)
login: root
Password: [Enter]
Initially, access to the router is limited to the console port after a recovery
installation. Access through the management ports and interfaces is set in the
configuration. For information about accessing the router through the console
port, see the administration guide for your particular router.
2.
Start the CLI:
# cli
3.
Copy the configuration file on the remote server to the router’s
/var/tmp
directory:
root@ host > ftp remote-server
user: username
password: password
ftp> bin
Type set to I.
ftp>
get /
path
/
file
ftp> bye
Goodbye.
Load and Commit the Configuration File
Once the saved configuration file is copied to the router, you load and commit the
file:
1.
Start the CLI configuration mode.
user@routername> configure
Entering configuration mode
[edit]
user@host#
2.
Load the file into the current configuration. You should override the existing file.
user@host#
load override /var/tmp/ filename
load complete
3.
Commit the file.
Copy Saved Files to the Router
■ 57
Chapter 5: Completing a Recovery Installation