Juniper JUNOS 10.2, Руководство по модернизации

Страница: 87 / 96

Chapter 7
Managing JUNOS Software Licenses
■
Adding New Licenses on page 65
■
Deleting a License on page 66
■
Saving License Keys on page 66
■
Verifying JUNOS Licenses on page 66
Adding New Licenses
Before adding new licenses, complete the following tasks:
■
Purchase the required licenses.
■
Establish basic network connectivity with the router. For instructions on
establishing basic connectivity, see the
Getting Started Guide for your router.
To add a new license key to the router with the CLI:
1.
Enter operational mode in the CLI.
2.
Enter one of the following CLI commands:
■
To add a license key from a file or URL, enter the following command,
specifying the filename or the URL where the key is located:
user@host> request system license add
filename
|
url
■
To add a license key from the terminal, enter the following command:
user@host> request system license add terminal
3.
When prompted, enter the license key, separating multiple license keys with a
blank line.
If the license key you enter is invalid, an error appears in the CLI output when
you press Ctrl+d to exit license entry mode.
4.
Go on to “Verifying JUNOS Licenses” on page 66.
Adding New Licenses
■ 65