Juniper JUNOS 10.2, Руководство по модернизации

Страница: 75 / 96

To use
em0
as an out-of-band management Ethernet interface, you must
configure its logical port, em0.0 , with a valid IP address.
■
For a T1600 standalone router (not connected to a TX Matrix Plus router
and not in a routing matrix):
[edit]
root@#
set interfaces fxp0 unit 0 family inet address
address
/
prefix-length
5.
Return to the top level of the hierarchy.
[edit groups re0]
root#
top
6.
Create the configuration group re1 .
[edit]
root#
set groups re1
7.
Navigate to the groups re1 level of the configuration hierarchy.
[edit]
root#
edit groups re1
8.
Specify the router hostname.
[edit groups re1]
root#
set system host-name host-name
9.
Configure the IP address and prefix length for the router Ethernet interface.
■
For all routers except the TX Matrix Plus router and T1600 routers in a routing
matrix:
[edit]
root@#
set interfaces fxp0 unit 0 family inet address address / prefix-length
■
For TX Matrix Plus and T1600 routers in a routing matrix only:
[edit]
root@#
set interfaces em0 unit 0 family inet address
address
/
prefix-length
To use em0 as an out-of-band management Ethernet interface, you must
configure its logical port, em0.0 , with a valid IP address.
■
For a T1600 standalone router (not connected to a TX Matrix Plus router
and not in a routing matrix):
[edit]
root@#
set interfaces fxp0 unit 0 family inet address address / prefix-length
10.
Return to the top level of the hierarchy.
[edit groups re0]
root#
top
11.
Specify the group application order.
[edit]
Set Up Routing Engine Configuration Groups
■ 53
Chapter 5: Completing a Recovery Installation