Creation date: Jul 24 16:17:13 2009
JUNOS version on snapshot:
junos : 10.1I20090724_0719-domestic
NOTE:
You can use the
show system snapshot media internal
command to determine
the partitioning scheme present on the internal media. Information for only one root
is displayed for single-root partitioning, whereas information for both roots is
displayed for dual-root partitioning.
NOTE:
Any removable media that has been formatted with dual-root partitioning
will not be recognized correctly by the
show system snapshot
CLI command on
systems that have single-root partitioning. Intermixing dual-root and single-root
formatted media on the same system is strongly discouraged.
partition Option with the request system software add Command
A new
partition
option is available with the
request system software add
CLI command.
Using this option will cause the media to be formatted and repartitioned before the
software is installed.
When the
partition
option is used, the format and install process is scheduled to run
on the next reboot. Therefore, it is recommended that this option be used together
with the
reboot
option.
For example:
user@host>
request system software add junos-srxsme-10.1R1-domestic.tgz no-copy
no-validate partition reboot
Copying package junos-srxsme-10.01R1-domestic.tgz to var/tmp/install
Rebooting ...
The system will reboot and complete the installation.
WARNING:
Using the
partition
option with the
request system software add
CLI
command erases the existing contents of the media. Only the current configuration
is preserved. Any important data should be backed up before starting the process.
Maximizing ALG Sessions
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, by default, the session
capacity number for RTSP, FTP, and TFTP ALG sessions is 10,000 per flow SPU. The
maximize-alg-sessions
option enables you to increase defaults as follows:
■
RTSP, FTP, and TFTP ALG session capacity: 25,000 sessions per flow SPU
Maximizing ALG Sessions
■
183
Maximizing ALG Sessions
