manualshive.com logo in svg

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Руководство по настройке

"Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X" - это подробное руководство по конфигурации продукта, которое вы можете скачать бесплатно с manualshive.com. Этот мануал поможет вам правильно настроить ваше оборудование и использовать его на полную мощность. Не упустите возможность загрузить его сейчас!

Поделиться
Скачать
background image

When you configure the mobile host to use RADIUS authentication for home agent
users by including the 

aaa

 keyword in the 

ip mobile host

 command, the Mobile IP

home agent application generates a RADIUS access-request message. The RADIUS
server then uses Juniper Networks vendor-specific attributes (VSAs) to provide the
appropriate authentication algorithm and secure key for the authentication request.

For information about the specific Juniper Networks VSAs used for Mobile IP
RADIUS-based authentication, see 

JUNOSe Broadband Access Configuration Guide

 and

RADIUS IETF Attributes

Subscriber Management

The Mobile IP home agent interoperates with the subscriber management application
on E Series routers. The subscriber management application enables customers to
dynamically provision new IP subscribers and quickly create new value-added
services.

You can set up your subscriber management environment to create dynamic IP
subscriber interfaces to provision subscribers and provide differentiated service
delivery. In this configuration, the service parameters for an IP subscriber are bound
to a dynamic IP subscriber interface.

During the registration process when the Mobile IP home agent has authenticated
the subscriber with AAA, the home agent locates or creates the appropriate IP tunnel
to carry the data traffic to the foreign agent. When Mobile IP obtains all of the
parameters required for interface creation, including the tunnel ID and the
authentication context, it directs the subscriber management application to create
the dynamic IP subscriber interface.

During the re-registration process when there is a handoff from an initial Mobile IP
foreign agent to a new Mobile IP foreign agent, the home agent reauthenticates the
subscriber with AAA and locates or creates the appropriate IP tunnel to carry the
data traffic to the new foreign agent. When Mobile IP obtains all of the parameters
required for interface creation, it directs the subscriber management application to
move the dynamic IP subscriber interface from the initial tunnel for the previous
foreign agent to the new tunnel that points to the new foreign agent. If this was the
last subscriber on the tunnel for the previous foreign agent, then the home agent
directs the IP tunneling application to tear down the initial tunnel.

For more information about subscriber management and dynamic IP subscriber
interfaces, see 

JUNOSe Broadband Access Configuration Guide

. For more information

about dynamic IP subscriber interfaces, see 

JUNOSe Broadband Access Configuration

Guide

.

Mobile IP Routing and Forwarding

The home agent supports both generic routing encapsulation (GRE) and Distance
Vector Multicast Routing Protocol (DVMRP, also known as IP-in-IP) tunnel
encapsulation for forward and reverse tunneling. When packets destined for the
mobile node reach a home agent, the home agent encapsulates the packets and
tunnels them to the CoA. Packets that exceed the maximum transmission unit (MTU)
value of the tunnel are dropped and an ICMP error message is sent to the source IP
address. Packets without an access route are returned to the source with an ICMP

318

■

Mobile IP Overview

JUNOSe 11.1.x IP Services Configuration Guide

Содержание IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Canon CR-1 Mark II Features Manual preview
CR-1 Mark II
Бренд: Canon Страницы: 8
Canon 3508B001 - PowerShot D10 Digital Camera Software Starter Manual preview
3508B001 - PowerShot D10 Digital Camera
Бренд: Canon Страницы: 64
Canon 3508B001 - PowerShot D10 Digital Camera Software User'S Manual preview
3508B001 - PowerShot D10 Digital Camera
Бренд: Canon Страницы: 47
Canon 3211B001 - PowerShot E1 Digital Camera Software Starter Manual preview
3211B001 - PowerShot E1 Digital Camera
Бренд: Canon Страницы: 83
Canon 3211B001 - PowerShot E1 Digital Camera Software User'S Manual preview
3211B001 - PowerShot E1 Digital Camera
Бренд: Canon Страницы: 50
Canon PowerShot A410 Software Starter Manual preview
PowerShot A410
Бренд: Canon Страницы: 106
Panasonic Avccam AG-AF100A Series Manual preview
Avccam AG-AF100A Series
Бренд: Panasonic Страницы: 19
Omron CX-SUPERVISOR V3 Brochure preview
CX-SUPERVISOR V3
Бренд: Omron Страницы: 5
Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Бренд: Adobe Страницы: 306
Mitsubishi DX-PC3 Instruction Manual preview
DX-PC3
Бренд: Mitsubishi Страницы: 38
COMPRO COMPRODVD2 User Manual preview
COMPRODVD2
Бренд: COMPRO Страницы: 18
ScanSoft PaperPort Manual preview
PaperPort
Бренд: ScanSoft Страницы: 33
ADS Technologies DVR Quick Manual preview
DVR
Бренд: ADS Technologies Страницы: 2
Avaya P130 SMON User Manual preview
P130 SMON
Бренд: Avaya Страницы: 160
AMX AXWire Instruction Manual preview
AXWire
Бренд: AMX Страницы: 16
GRASS VALLEY MEDIAEDGE3 DCM Datasheet preview
MEDIAEDGE3 DCM
Бренд: GRASS VALLEY Страницы: 2
GRASS VALLEY K2 Dyno PA Configuration Manual preview
K2 Dyno PA
Бренд: GRASS VALLEY Страницы: 60
Autodesk ARCHITECTURE 2010 Brochure preview
ARCHITECTURE 2010
Бренд: Autodesk Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды