manualshive.com logo in svg

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Руководство по настройке

"Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X" - это подробное руководство по конфигурации продукта, которое вы можете скачать бесплатно с manualshive.com. Этот мануал поможет вам правильно настроить ваше оборудование и использовать его на полную мощность. Не упустите возможность загрузить его сейчас!

Поделиться
Скачать
background image

The data MDT application enables you to solve the problem of IP routers flooding
unnecessary multicast information to PE routers that have no interested receivers
for a particular VPN multicast group. The multicast data MDT solution requires the
creation of a new dynamic IP tunnel by the PE router if the source exceeds a
configured rate threshold parameter.

The data MDT application supports a co-located tunnel interface. The base GRE
interface and its co-located data MDT interface must be both static or both dynamic.

The data MDT application creates a dynamic IP tunnel using the attributes in a
customized destination profile.

When creating the dynamic IP tunnel, the data MDT application assigns its name
using the following format:

mvpn-dynamic-

number

For the data MDT application, you should configure a customized destination profile.
For information about configuring multicast VPNs using GRE tunnels, see 

Configuring

PIM for IPv4 Multicast

 in 

JUNOSe Multicast Routing Configuration Guide

.

Mobile IP and Dynamic IP Tunnels

The Mobile IP application can create dynamic point-to-point GRE and DVMRP tunnels.

The Mobile IP application is a tunneling-based solution that enhances the utility of E
Series Broadband Services Routers at the edge of the network between fixed wire
and wireless network domains. This tunneling-based solution enables a router on a
user's home subnet to intercept and forward IP packets to users while they roam
beyond traditional network boundaries.

To achieve mobility, the mobile node takes a secondary IP address that matches the
new network and redirects the traffic bound to the primary or home address to the
mobile node's new network. In the Mobile IP feature, the two agents that accomplish
this task are the home agent and the foreign agent.

The Mobile IP application can create a dynamic IP tunnel using the attributes in a
default destination profile or a customized destination profile.

When creating the dynamic IP tunnel, the Mobile IP application assigns its name
using the following format:

mobileIp-dynamic-

number

When the Mobile IP application creates the dynamic IP tunnel, it sets a Don't
Fragment bit in the packet and in the outer IP header.

The Mobile IP home agent uses the dynamic IP tunnel for routing loop detection.
The home agent examines packets that are intercepted by the home agent and
destined for the mobile node. If the packet is already encapsulated, and the inner
destination address is the same as the outer destination address, then the system
examines the outer source address. If the outer source address is the same as the
tunnel destination address or the foreign agent care-of-address (CoA), the system
silently discards the packet. In all other cases, the tunnel encapsulation is successful.

262

■

Dynamic IP Tunnel Overview

JUNOSe 11.1.x IP Services Configuration Guide

Содержание IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IP SERVICES - CONFIGURATION GUIDE V 11.1.X

KAPERSKY ANTI-VIRUS 5.0 - FOR SAMBA SERVERS Administrator'S Manual preview
ANTI-VIRUS 5.0 - FOR SAMBA SERVERS
Бренд: KAPERSKY Страницы: 84
KAPERSKY ADMINISTRATION KIT 6.0 Getting Started preview
ADMINISTRATION KIT 6.0
Бренд: KAPERSKY Страницы: 37
KAPERSKY ADMINISTRATION KIT 6.0 Deployment Manual preview
ADMINISTRATION KIT 6.0
Бренд: KAPERSKY Страницы: 109
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 4.0 User Reference Manual preview
NETWORK BASIC - USER REFERENCE GUIDE 4.0
Бренд: Red Hat Страницы: 92
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Бренд: KAPERSKY Страницы: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Бренд: Red Hat Страницы: 110
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Бренд: Symantec Страницы: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Бренд: Seagate Страницы: 2
COMPRO Y-C User Manual preview
Y-C
Бренд: COMPRO Страницы: 8
Promise Technology PAM User Manual preview
PAM
Бренд: Promise Technology Страницы: 84
Texas Instruments NoteFolio Software Manual preview
NoteFolio
Бренд: Texas Instruments Страницы: 37
BARIX Streaming Client User Manual preview
Streaming Client
Бренд: BARIX Страницы: 51
GameShark Media Manager Instruction Manual preview
Media Manager
Бренд: GameShark Страницы: 15
UNIBLUE DriverScanner 2010 Product Manual preview
DriverScanner 2010
Бренд: UNIBLUE Страницы: 12
FieldServer FS-8700-80 Driver Manual preview
FS-8700-80
Бренд: FieldServer Страницы: 43
Picsel CLIE PEG-NZ90 Support Manual preview
CLIE PEG-NZ90
Бренд: Picsel Страницы: 8
Qlogic SANsurfer iSCSI HBA Manager User Manual preview
SANsurfer iSCSI HBA Manager
Бренд: Qlogic Страницы: 150
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT... Reference preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT...
Бренд: IBM Страницы: 109

Бренды по названию

Популярные бренды

Загрузить еще бренды