manualshive.com logo in svg

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Руководство по настройке

"Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X" - это подробное руководство по конфигурации продукта, которое вы можете скачать бесплатно с manualshive.com. Этот мануал поможет вам правильно настроить ваше оборудование и использовать его на полную мощность. Не упустите возможность загрузить его сейчас!

Поделиться
Скачать
background image

about configuring BFD for EBGP routes, see 

Configuring BGP Routing

 in 

JUNOSe BGP

and MPLS Configuration Guide

.

How BFD Works

In a BFD-configured network, when a client launches a BFD session with a peer, BFD
begins sending slow, periodic BFD control packets that contain the interval values
that you specified when you configured the BFD peers. This is known as the
initialization state and BFD does not generate any up or down notifications in this
state.

When another BFD interface acknowledges the BFD control packets, the session
moves into an up state and begins to more rapidly send periodic control packets.

If a data path failure occurs and BFD does not receive a control packet within the
configured amount of time, the data path is declared down and BFD notifies the BFD
client. The BFD client can then perform the necessary actions to reroute traffic. This
process can be different for different BFD clients. All BFD-configured IGP clients (like
IS-IS, OSPF, PIM, and RIP) launch BFD sessions when they detect neighbors through
their own hello protocols. However, a static BFD client launches a BFD session when
it detects that its next hop is resolved.

The BFD Admin Down state is used to bring down a BFD session administratively,
to protect client applications from BFD configuration removal, license issues, and
clearing of BFD sessions. When BFD enters the Admin Down state, BFD notifies the
new state to its peer for a failure detection time and after the time expires, the client
stops transmitting packets. For the Admin Down state to work, the peer, which
receives the Admin Down state notification, must have the capability to distinguish
between administratively down state and real link down. A BFD session moves to
the Admin Down state under the following conditions:

■

When a BFD configuration is removed for the last client tied to a BFD session,
BFD moves to the Admin Down state and communicates the change to the peer
to enable the client protocols to handle this in a seamless manner without going
down.

■

When a BFD license is removed on the client, it moves to the Admin Down state
and communicates the change to the remote system to enable the client protocols
to handle this in a seamless manner without going down.

■

When the 

clear bfd session 

 command is executed, the BFD sessions move to

the Admin Down state before restarting the BFD sessions so that the client
applications are not impacted.

Negotiation of the BFD Liveness Detection Interval

When you issue the appropriate 

bfd-liveness-detection

 command on an IS-IS, OSPF,

RIP, or PIM interface, BFD liveness detection is established with all of its BFD-enabled
peers. When an update is received from a peer—if BFD is enabled and if the session
is not already present—the local peer attempts to create a BFD session to the remote
peer.

114

■

Bidirectional Forwarding Detection Overview

JUNOSe 11.1.x IP Services Configuration Guide

Содержание IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Garmin eTrex H - Hiking GPS Receiver Owner'S Manual preview
eTrex H - Hiking GPS Receiver
Бренд: Garmin Страницы: 100
Emerson Smart Wireless Navigator Reference Manual preview
Smart Wireless Navigator
Бренд: Emerson Страницы: 22
Emerson Site Manager User Manual preview
Site Manager
Бренд: Emerson Страницы: 130
MACROMEDIA FLEX Reference preview
FLEX
Бренд: MACROMEDIA Страницы: 830
Black Box FX160A User Manual preview
FX160A
Бренд: Black Box Страницы: 65
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Бренд: Symantec Страницы: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Бренд: Symantec Страницы: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Бренд: Symantec Страницы: 90
UNIBLUE DRIVERSCANNER Quick Start Manual preview
DRIVERSCANNER
Бренд: UNIBLUE Страницы: 3
DigiDesign Trillium Lane Labs Manual preview
Trillium Lane Labs
Бренд: DigiDesign Страницы: 114
FieldServer FS-8700-115 Instruction Manual preview
FS-8700-115
Бренд: FieldServer Страницы: 15
Ulead MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR... User Manual preview
MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR...
Бренд: Ulead Страницы: 308
FARONICS ANTI-VIRUS Getting Started Manual preview
ANTI-VIRUS
Бренд: FARONICS Страницы: 4
Omega Engineering M-4066 User Manual preview
M-4066
Бренд: Omega Engineering Страницы: 63
Hitachi MK-96RD617-08 User Manual preview
MK-96RD617-08
Бренд: Hitachi Страницы: 248
Cisco Configuration Professional Express 1.0 User Manual preview
Configuration Professional Express 1.0
Бренд: Cisco Страницы: 40
HP Neoware e370 - Thin Client Quick Start Manual preview
Neoware e370 - Thin Client
Бренд: HP Страницы: 24
HP nld Manual preview
nld
Бренд: HP Страницы: 330

Бренды по названию

Популярные бренды

Загрузить еще бренды