Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Руководство по настройке

Страница: 237 / 366

■
Connection Time—Date and time at which this neighbor was connected
■
Add Branches Sent—Number of add branch messages sent to this neighbor
■
Delete Branches Sent—Number of delete branch messages sent to this
neighbor
■
Line-configurations—Number of line configurations sent to this neighbor
■
OAM Loopback Requests Sent—Number of OAM loopback requests sent to
this neighbor
■
OAM Loopback Responses Received—Number of OAM loopback responses
received from this neighbor
■
Protocol State—Protocol state of this neighbor
■
Number of configured neighbors—Number of configured ANCP neighbors
■
Number of Neighbors in GSMP_ESTAB state—Number of ANCP neighbors
that are in an established GSMP state
■
Number of neighbors in GSMP_EMPTY state—Number of ANCP neighbors
that are in an unestablished GSMP state
■
Example 1
host1# show l2c neighbor name accessnode_1002
Neighbor Name: accessnode_1002
Neighbor Id: 0abc.0abc.1002
Maximum Branches: 10
Topology Discovery: true
Maximum Discovery Entries: 10000
Ip address: 1.1.1.2
TCP port: 1025
Connection Time: 03/02/2006 11:06:16
Add Branches Sent: 0
Delete Branches Sent: 0
Line-configurations: 0
OAM Loopback Requests Sent: 0
OAM Loopback Responses Received: 0
Protocol State: GSMP_ESTAB
■
Example 2
host1# show l2c neighbor brief
Name Mac Address Remote Address Protocol State
-------------------- ---------------- ---------------- ----------------
accessnode1 0abc.0abc.0abc null EMPTY
■
Example 3
host1(config)# show l2c neighbor summary
L2C:
Number of configured Neighbors: 1
Monitoring ANCP
■ 211
Chapter 7: Configuring ANCP