manualshive.com logo in svg

Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X, Руководство по настройке

"Juniper IP SERVICES - CONFIGURATION GUIDE V 11.1.X" - это подробное руководство по конфигурации продукта, которое вы можете скачать бесплатно с manualshive.com. Этот мануал поможет вам правильно настроить ваше оборудование и использовать его на полную мощность. Не упустите возможность загрузить его сейчас!

Поделиться
Скачать
background image

■

See 

E120 and E320 Module Guide, Table 1, Modules and IOAs 

for detailed module

specifications.

■

See 

E120 and E320 Module Guide, Appendix A, IOA Protocol Support

 for information

about the modules that support IP tunnels.

Module Requirements

The supported modules for creating IP tunnels depends on the type of E Series router
that you have.

ERX7xx Models, ERX14xx Models, and the ERX310 Router

To create dynamic IP tunnels on an ERX7xx model, ERX14xx model, or an ERX310
router, you must install a Service line module (SM) or a module that supports the use
of shared tunnel-server ports. For information about installing modules in the ERX
routers, see the 

ERX Hardware Guide

.

SMs provide dedicated tunnel-server ports that are always configured on the module.
Unlike other line modules, SMs do not pair with corresponding I/O modules that
contain ingress and egress ports. Instead, they receive data from and transmit data
to other line modules with access to ingress and egress ports on their own associated
I/O modules. However, you must assign interfaces on other line modules or loopback
interfaces to act as source endpoints for the tunnel.

You can also create IP tunnels on router modules that support shared tunnel-server
ports. You can configure (provision) a shared tunnel-server port to use a portion of
the module's bandwidth to provide tunnel services. For a list of the modules that
support shared tunnel-server ports, see the 

ERX Module Guide

.

To configure IPSec transport mode in the GRE or DVMRP destination profile, you
must install an IPSec Service Module (ISM).

For information about configuring tunnel services on dedicated and shared
tunnel-server ports, see 

Managing Tunnel Service and IPSec Service Interfaces

 in 

JUNOSe

Physical Layer Configuration Guide

.

All line modules forward traffic to IP tunnels. For information about which line
modules accept traffic for IP tunnels, see the 

ERX Module Guide

.

E120 Router and E320 Router

To create dynamic IP tunnels on an E120 router or an E320 router, you must install
an ES2 4G line module (LM) with an ES2-S1 Service I/O adapter (IOA), or an IOA that
supports the use of shared tunnel-server ports. For information about installing
modules in these routers, see the 

E120 and E320 Hardware Guide

.

The ES2 4G LM and ES2-S1 Service IOA combination provides a dedicated
tunnel-server port that are always configured on the IOA. Unlike SMs, the ES2 4G
LM requires the ES2-S1 Service IOA to condition it to receive and transmit data to
other line modules. The ES2-S1 Service IOA also does not have ingress or egress
ports.

264

■

Platform Considerations

JUNOSe 11.1.x IP Services Configuration Guide

Содержание IP SERVICES - CONFIGURATION GUIDE V 11.1.X















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IP SERVICES - CONFIGURATION GUIDE V 11.1.X

Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Бренд: Extreme Networks Страницы: 264
Barco NioWatch Installation & User Manual preview
NioWatch
Бренд: Barco Страницы: 22
Xerox 701P40211 System Manual preview
701P40211
Бренд: Xerox Страницы: 110
Avaya INDeX Agent Assist Supervisor Manual preview
INDeX Agent Assist
Бренд: Avaya Страницы: 12
McAfee VIRUSSCAN ENTERPRISE Datasheet preview
VIRUSSCAN ENTERPRISE
Бренд: McAfee Страницы: 2
MACROMEDIA FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE Reference preview
FLASH 8-ACTIONSCRIPT 2.0 LANGUAGE
Бренд: MACROMEDIA Страницы: 1378
Intel 2521131 - Intel Wasp Motherboard Quick Start Manual preview
2521131 - Intel Wasp Motherboard
Бренд: Intel Страницы: 1
Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND Brochure preview
RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND
Бренд: Tech Source Страницы: 2
Autodesk 495B1-05A111-1301 - 3ds Max Design 2010 User Manual preview
495B1-05A111-1301 - 3ds Max Design 2010
Бренд: Autodesk Страницы: 916
Pharos Ostia 3.x User Manual preview
Ostia 3.x
Бренд: Pharos Страницы: 93
Ulead MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0 Manual preview
MEDIASTUDIO PRO 7.0 - HD PLUG-IN 2.0
Бренд: Ulead Страницы: 11
Nintendo RVLRRFPE Instruction Booklet preview
RVLRRFPE
Бренд: Nintendo Страницы: 34
Juniper CARE PLUS Datasheet preview
CARE PLUS
Бренд: Juniper Страницы: 8
Acer RDM User Manual preview
RDM
Бренд: Acer Страницы: 4
Canon Elura 60 - Elura 60 MiniDV Camcorder Instruction Manual preview
Elura 60 - Elura 60 MiniDV Camcorder
Бренд: Canon Страницы: 89
Canon EOS 30D - 8.2MP Digital SLR Camera Instruction Manual preview
EOS 30D - 8.2MP Digital SLR Camera
Бренд: Canon Страницы: 28
MACROMEDIA FLASH MX 2004-FLASH JAVASCRIPT DICTIONARY Manual preview
FLASH MX 2004-FLASH JAVASCRIPT DICTIONARY
Бренд: MACROMEDIA Страницы: 386
Sony VAIO VGN-TXN15P/B User Manual preview
VAIO VGN-TXN15P/B
Бренд: Sony Страницы: 172

Бренды по названию

Популярные бренды

Загрузить еще бренды