Jungheinrich ESE 533 Скачать руководство пользователя

Страница: 39 / 133

• Adjust the height of the battery

roller stand. To do this,
• release the counternuts (52) on

the four feet (54).

• Turn the adjusting spindle (51)

with the square key until the
precise

transfer

height

reached. Repeat this for each
foot.

The  battery  roller  stand  must  be
aligned  horizontally  to  prevent  the
battery from rolling backwards.
• Tighten  the  counternuts  (52)  on

the four feet (54).

• Pull the battery onto the battery

roller stand (53).

• Tighten the battery retainer (55) to

prevent the battery from rolling
backwards.

The battery has been removed.
Assembly is carried out in reverse
order.

001

002

003

004

005

001

002

CAUTION!

When the battery has been locked the locking plate (46) should not permit any
battery movement.

Check that the battery is firmly secured.

If necessary re-tighten the nuts (M10) (47) of the pull bow (48) after tensioning.

02.21 en-GB

Содержание ESE 533






































































































































Результаты поиска

Содержание ESE 533

Отзывы:

Похожие инструкции для ESE 533

Бренды по названию

Популярные бренды

Jungheinrich ESE 533, Руководство по эксплуатации

Результаты поиска

Содержание ESE 533

Отзывы:

Похожие инструкции для ESE 533

Бренды по названию

Популярные бренды