manualshive.com logo in svg

Jungheinrich ESE 533, Руководство по эксплуатации, Страница: 57 / 133

Поделиться
Скачать
Jungheinrich ESE 533 Скачать руководство пользователя страница 57

3.5

Checks and operations to be carried out when the truck is

operational

WARNING!

Risk  of  accident  due  to  damage  to  or  other  defects  in  the  truck  and  optional
features

If damage or other truck or attachment (optional equipment) defects are discovered
during the following checks, the truck must be taken out of service until it has been
repaired.

u

Report any defects immediately to your supervisor.

u

Mark defective truck and take out of service.

u

Do not return the industrial truck to service until you have identified and rectified
the fault.

Procedure

• Test warning indicators and safety devices:

• Test  the  Emergency  Disconnect  function  by  pressing  the  Emergency

Disconnect  switch.  The  main  circuit  is  disconnected  and  no  truck  operations
can be performed. Now pull the Emergency Disconnect switch to unlock it.

• Test the horn by pressing the "warning signal" button.
• Test the effectiveness of the brakes, see page 65.
• Test the steering, see page 67.
• Test the hydraulic system, see page 68.
• Test travel operations, see page 63.

• Test the controls and displays and check for damage, see page 43.

• Check the controls are automatically restored to the neutral position after being

applied.

57

02.21 en-GB

Содержание ESE 533






































































































































Отзывы:

Нет отзывов