Jungheinrich ESE 533 Скачать руководство пользователя

Страница: 87 / 133

7.1.8

Delete all user codes,

Requirements

– To prepare the truck for operation, see page 78.

Procedure

• Press the O key (116).
• Enter the valid master code with the digit keys.

When you enter the valid master code the LED
(115) flashes green.

• Enter the parameters 0-0-4 with the digit keys.
• Confirm with the SET key (114).

The LEDs (113,115) flash green.

• Enter the code 3-2-6-5 with the digit keys.
• Confirm with the SET key (114).

Wait until the LED (115) flashes green. All user codes are deleted.

• Press the O key (116).

The truck is switched off and the LED (115) is lit red.

• Check that the user codes have been deleted:

• Switch on the truck with a previous user code, see page 78.

After entering the user code the LED (115) flashes red and the truck remains
switched off.

• Press the O key (116).

The truck remains switched off and the LED (115) is lit red.

114

111

112

113

116

115

02.21 en-GB

Содержание ESE 533






































































































































Результаты поиска

Содержание ESE 533

Отзывы:

Похожие инструкции для ESE 533

Бренды по названию

Популярные бренды

Jungheinrich ESE 533, Руководство по эксплуатации

Результаты поиска

Содержание ESE 533

Отзывы:

Похожие инструкции для ESE 533

Бренды по названию

Популярные бренды