Jungheinrich ERE 224, Руководство по эксплуатации

Страница: 69 / 87

F 12
0106
.GB
7.3 Recommissioning the truck
– Thoroughly clean the fork-lift truck.
– Lubricate the fork-lift truck according to the lubrication chart (refer to chapter F).
– Clean the battery. Grease the pole screws using pole grease and reconnect the
battery.
– Recharge the battery (refer to chapter D).
– Check if the gear oil contains condensed water and change if required.
– Check if the hydraulic oil contains condensed water and change if required.
– Start up the fork-lift truck (refer to chapter E).
Z
Battery-operated fork-lift trucks:
If switching troubles are experienced in the electric system, spray the exposed con-
tacts with contact spray and remove any oxide layer on the contacts of the operating
controls by repeated operation.
F
Perform several brake tests immediately after recommissioning the truck.
8 Safety checks to be performed at regular intervals and following any untoward
incidents (
D
: Accident prevention check according to BGV D27)
At least once yearly, or after any untoward incident, the fork-lift truck has to be chek-
ked by a qualified inspector. The inspector must assess the condition of the truck from
a standpoint purely concerned with safety aspects, uninfluenced by any company or
economic circumstances. The inspector must be adequately informed and experi-
enced to be able to assess the condition of the fork-lift truck and the effectiveness of
the safety installations based on the technical rules and principles governing the in-
spection of fork-lift trucks.
The inspection must comprise a comprehensive check of the technical condition of
the fork-lift truck with regard to accident prevention aspects. Apart from this, the fork-
lift truck must be thoroughly inspected for damage possibly caused by incorrect use
of the fork-lift truck. The inspection results must be recorded in an inspection report
which must be kept available for a period spanning at least the next two inspection
intervals.
The user has to ensure that all defects are eliminated without delay.
Z
The manufacturer has set up a special safety service with specially qualified staff. As
visual proof that the fork-lift truck has passed the safety inspection, a plaque is affixed
to it. This plaque indicates in which month of which year the next test will be due.
F 12
0106
.GB
7.3 Recommissioning the truck
– Thoroughly clean the fork-lift truck.
– Lubricate the fork-lift truck according to the lubrication chart (refer to chapter F).
– Clean the battery. Grease the pole screws using pole grease and reconnect the
battery.
– Recharge the battery (refer to chapter D).
– Check if the gear oil contains condensed water and change if required.
– Check if the hydraulic oil contains condensed water and change if required.
– Start up the fork-lift truck (refer to chapter E).
Z
Battery-operated fork-lift trucks:
If switching troubles are experienced in the electric system, spray the exposed con-
tacts with contact spray and remove any oxide layer on the contacts of the operating
controls by repeated operation.
F
Perform several brake tests immediately after recommissioning the truck.
8 Safety checks to be performed at regular intervals and following any untoward
incidents (
D
: Accident prevention check according to BGV D27)
At least once yearly, or after any untoward incident, the fork-lift truck has to be chek-
ked by a qualified inspector. The inspector must assess the condition of the truck from
a standpoint purely concerned with safety aspects, uninfluenced by any company or
economic circumstances. The inspector must be adequately informed and experi-
enced to be able to assess the condition of the fork-lift truck and the effectiveness of
the safety installations based on the technical rules and principles governing the in-
spection of fork-lift trucks.
The inspection must comprise a comprehensive check of the technical condition of
the fork-lift truck with regard to accident prevention aspects. Apart from this, the fork-
lift truck must be thoroughly inspected for damage possibly caused by incorrect use
of the fork-lift truck. The inspection results must be recorded in an inspection report
which must be kept available for a period spanning at least the next two inspection
intervals.
The user has to ensure that all defects are eliminated without delay.
Z
The manufacturer has set up a special safety service with specially qualified staff. As
visual proof that the fork-lift truck has passed the safety inspection, a plaque is affixed
to it. This plaque indicates in which month of which year the next test will be due.