Jungheinrich ERE 224, Руководство по эксплуатации

Страница: 64 / 87

0106
.GB
F 7
5.1 Consumption-type materials
Handling consumption-type materials: Consumption-type materials must always
be handled properly. Manufacturer's instructions are to be observed.
Z
Improper handling is injurious to health, life, and environment. Consumption-type ma-
terials must be stored in adequate containers. They might be inflammable and, there-
fore, must not come into contact with hot components or open fire.
When filling in consumption-type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption-type material and binding agent is to be dis-
posed of according to the regulations.
Grease data
Code Order-no. Supply qty. Designation Used for:
A 50 449 669 5.0 l H-LP 46, DIN 51524 Hydraulic system
B 50 380 904 5.0 l Fuchs Titan Cytrac
HSY 75W-90 Transmission
C 29 200 810 5.0 l H-LP 10, DIN 51524 Hydraulic system
D 29 200 150 1,0 l Brake fluid Brake system
E 29 201 430 1.0 kg Grease, DIN 51825 Lubrication
F 29 200 100 1.0 kg Grease, TTF52 Lubrication
G 29 201 280 0.51 kg Chain spray Chains
Code Saponification Dropping
point °C
Worked penetr. at
25°C
NLG1
class
Operating tem-
perature °C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100
0106
.GB
F 7
5.1 Consumption-type materials
Handling consumption-type materials: Consumption-type materials must always
be handled properly. Manufacturer's instructions are to be observed.
Z
Improper handling is injurious to health, life, and environment. Consumption-type ma-
terials must be stored in adequate containers. They might be inflammable and, there-
fore, must not come into contact with hot components or open fire.
When filling in consumption-type materials, use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualities, except if mixing is
expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption-type material and binding agent is to be dis-
posed of according to the regulations.
Grease data
Code Order-no. Supply qty. Designation Used for:
A 50 449 669 5.0 l H-LP 46, DIN 51524 Hydraulic system
B 50 380 904 5.0 l Fuchs Titan Cytrac
HSY 75W-90 Transmission
C 29 200 810 5.0 l H-LP 10, DIN 51524 Hydraulic system
D 29 200 150 1,0 l Brake fluid Brake system
E 29 201 430 1.0 kg Grease, DIN 51825 Lubrication
F 29 200 100 1.0 kg Grease, TTF52 Lubrication
G 29 201 280 0.51 kg Chain spray Chains
Code Saponification Dropping
point °C
Worked penetr. at
25°C
NLG1
class
Operating tem-
perature °C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100