Jungheinrich ERE 224, Руководство по эксплуатации

Страница: 35 / 87

1003
.GB
E 6
3 Starting up the truck
F
The driver must make sure that nobody is within the danger area of the truck before
the truck is switched on or operated, or before a load is lifted.
Checks and operations to be performed before starting daily work
– Perform a visual check of the entire truck (especially wheels and load lifting equip-
ment) for visible damage.
– Check the steering wheel play.
– Ensure through a visual inspection that the battery is securely locked in place and
that the cable connections are in order.
3.1 Truck variants
F
Commissioning and operation of the truck depend on the truck variant and truck con-
figuration.
3.2 Switching on the truck
– Pull out the master switch (3).
– Use the key to set the key switch (7) to
position “I”.
– Check the horn (10) for proper func-
tioning.
F
When swivelling the hinged standing
platform upwards (if available), do not
reach between the standing platform
and the truck’s side wall.
Check the braking function
(refer to section 4.2).
The truck is now ready for operation.
The display instrument (CANDIS (6)
(
o
)) shows the available battery capaci-
ty.
Truck variant
Truck configuration Hinged driver
standing
platform
Fixed driver
standing
platform
Suspended
driver standing
platform
Control shaft – movable
t t --
– rigid
-- o t
Steering – mechanic
t t --
– electric
o o t
Safety
extension – hinged
t -- --
– rigid
-- t t
Operating
mode – pedestrian oper.
t -- --
– stand-on oper.
t t t
3
8
7
10
6
1003
.GB
E 6
3 Starting up the truck
F
The driver must make sure that nobody is within the danger area of the truck before
the truck is switched on or operated, or before a load is lifted.
Checks and operations to be performed before starting daily work
– Perform a visual check of the entire truck (especially wheels and load lifting equip-
ment) for visible damage.
– Check the steering wheel play.
– Ensure through a visual inspection that the battery is securely locked in place and
that the cable connections are in order.
3.1 Truck variants
F
Commissioning and operation of the truck depend on the truck variant and truck con-
figuration.
3.2 Switching on the truck
– Pull out the master switch (3).
– Use the key to set the key switch (7) to
position “I”.
– Check the horn (10) for proper func-
tioning.
F
When swivelling the hinged standing
platform upwards (if available), do not
reach between the standing platform
and the truck’s side wall.
Check the braking function
(refer to section 4.2).
The truck is now ready for operation.
The display instrument (CANDIS (6)
(
o
)) shows the available battery capaci-
ty.
Truck variant
Truck configuration Hinged driver
standing
platform
Fixed driver
standing
platform
Suspended
driver standing
platform
Control shaft – movable
t t --
– rigid
-- o t
Steering – mechanic
t t --
– electric
o o t
Safety
extension – hinged
t -- --
– rigid
-- t t
Operating
mode – pedestrian oper.
t -- --
– stand-on oper.
t t t
3
8
7
10
6