Jungheinrich ERE 224, Руководство по эксплуатации

Страница: 46 / 87

E 17
1003
.GB
Commissioning
After switching on the master switch and, if required, the key switch, the LED (20)
lights up red.
After entering the correct operator code (factory setting 2-5-8-0) the LED (20) lights
up red.
When an incorrect code has been entered, LED (20) lights up red for two seconds.
After that you can enter a new code.
Z
The Set key (21) has no function in operating mode.
Switching off
The truck is switched off by actuating the
o -
key (25).
Z
The truck can be switched off automatically after a preset time. For that purpose the
corresponding code lock parameter must be set (refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
22
21
20
25
24 23
E 17
1003
.GB
Commissioning
After switching on the master switch and, if required, the key switch, the LED (20)
lights up red.
After entering the correct operator code (factory setting 2-5-8-0) the LED (20) lights
up red.
When an incorrect code has been entered, LED (20) lights up red for two seconds.
After that you can enter a new code.
Z
The Set key (21) has no function in operating mode.
Switching off
The truck is switched off by actuating the
o -
key (25).
Z
The truck can be switched off automatically after a preset time. For that purpose the
corresponding code lock parameter must be set (refer to section 5.4).
1 2 3
4 5 6
7 8 9
0
Set
22
21
20
25
24 23