Jungheinrich EJE 220, Руководство по эксплуатации

Страница: 20 / 232

Drive system
A fixed AC three-phase motor actuates the drive wheel via a bevel spur gearbox.
The electronic traction controller ensures smooth drive-motor-speed control and
hence smooth starting, powerful acceleration and electrically controlled braking with
energy regeneration. The driver can choose from 3 travel programs depending on
the load and the environment: from high-performance to energy-saving.
Tiller
The driver steers with an ergonomic tiller. All travel and lift operations can be
performed sensitively without having to reach. The tiller has a steer angle of 180°.
Electrical system
The truck has an electronic traction controller. The operating voltage of the truck's
electrical system is 24 volts.
Controls and displays
Ergonomic controls ensure fatigue-free operation for sensitive application of the
travel and hydraulic operations. The battery discharge indicator shows the available
battery capacity. The CanDis display instrument (
o
) or the display unit (2-inch
display) (
o
) shows the operator key information such as the service hours, battery
capacity and event messages.
3.2.1 Hourmeter
Z
Prepare the truck for operation, see page 68 or see page 106.
Service hours are counted while the truck is operational and one of the following
controls is applied:
– Tiller in travel zone "F", see page 78.
– "Slow travel button", see page 80.
– "Lift" button, see page 84.
– "Lower" button, see page 85.
On the EJE 220r / 225r the service hours are also counted when one of the following
controls is applied:
– "Ramp lift raise" button, see page 86.
– "Ramp lift lower" button, see page 87.
20
04.19 en-GB