manualshive.com logo in svg

Jungheinrich EJE 220, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich EJE 220 Скачать руководство пользователя страница 113

7.3.6

Change operator code

Requirements

– To prepare the truck for operation, see page 108.

Procedure

• Press the O key (69).
• Enter the valid master code with the digit keys.

When  you  enter  the  valid  master  code  the  LED
(68) flashes green.

• Enter the parameters 0-0-2 with the digit keys.
• Confirm with the SET key (67).

The LEDs (64,68) flash green.

• Enter the user code to be changed with the digit keys.
• Confirm with the SET key (67).

The LEDs (65,68) flash green.

• Enter the new user code with the digit keys.

Z

The  length  (4-6  digit)  of  the  new  user  code  must  be  the  same  as  that  of  the
previously entered master code. The new user code must also be different from
the existing master code.

• Confirm with the SET key (67).

The LEDs (66,68) flash green.

• Enter the new user code again with the digit keys.
• Confirm with the SET key (67).

Wait until the LED (68) flashes green. The setting is saved.

• Press the O key (69).

The truck is switched off and the LED (68) is lit red.

• Check the new user code:

• Switch on the truck with the new user code, see page 108

After  entering  the  valid  user  code  the  LED  (68)  lights  up  green,  the  travel
program  setting  is  shown  by  the  illumination  of  the  corresponding  LEDs
(64,65,66) and the truck is switched on.

• Press the O key (69).

The truck is switched off and the LED (68) is lit red.

67

64

65

66

69

68

113

04.19 en-GB

Содержание EJE 220









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды