Jungheinrich EJE 220, Руководство по эксплуатации

Страница: 74 / 232

Negotiating slopes and inclines
Negotiating slopes and inclines up to 20 % is only permitted when they are
recognised lanes. The slopes and inclines must be clean, have a non-slip surface,
and negotiating them safely must be within the technical specifications of the truck.
The truck must always be driven with the load facing uphill. The industrial truck must
not be turned, operated at an angle or parked on inclines or slopes. Inclines must
only be negotiated at slow speed, with the driver ready to brake at any moment.
Negotiating lifts, loading ramps and docks
Lifts may only be negotiated if they have sufficient capacity, are suitable for driving
on and authorised for truck traffic by the owner. The driver must satisfy himself of the
above before entering these areas. The truck must enter lifts with the load in front
and must take up a position which does not allow it to come into contact with the
walls of the lift shaft. Persons riding in the lift with the forklift truck must only enter
the lift after the truck has come to a rest and must leave the lift before the truck. The
driver must ensure that the loading ramp / dock cannot move or come loose during
loading / unloading.
Type of loads to be carried
The operator must make sure that the load is in a satisfactory condition. Loads must
always be positioned safely and carefully. Use suitable precautions to prevent parts
of the load from tipping or falling down. Prevent liquid loads from sloshing out.
WARNING!
Electromagnetic influence can result in accidents
Strong magnets can cause electronic components such as Hall sensors to become
damaged, resulting in accidents.
u Do not use magnets in the operating area of the truck. Exceptions to this rule are
commercial, weak clamping magnets for attaching notices.
74
04.19 en-GB