76
3
Award BIOS Setup Utility
Onboard AC97 Codec
Enabled
This option is used to enable the onboard AC97
codec.
Disabled
This option is used to disable the onboard AC97
codec. Disable the onboard AC97 codec when
using a 6-channel audio CNR card or an audio PCI
card.
CNR LAN Control
Enabled
Select this option to use the LAN CNR board that
is installed in the CNR slot.
Disabled
Select this option to disable the LAN CNR board
that is installed in the CNR slot.
Onboard LAN Control (NB73-EA only)
This field is used to enable or disable the Realtek RTL8100 LAN
chip.
Onboard Super IO Device
Move the cursor to this field and press <Enter>. The following fields
will appear.
KBC Input Clock
This is used to select the input clock of your keyboard.
Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to
power-on the system. To use this function, make sure JP1 is set to
2-3 On - the Wake-On-Keyboard/Mouse function enabled. Refer
to “Jumper Settings for Wake-On-Keyboard/Wake-On-Mouse” in
chapter 2 for more information.
Disabled
Default setting.
Warning:
If JP1 was previously enabled with a pass-
word set in the “KB Power On Password” field,
and now you wish to disable the keyboard
password function, make sure to set this field
to disabled prior to setting JP1 to disabled
(1-2 On). You will not be able to boot up the
system if you fail to do so.
