JUMO AQUIS touch S 202581, Руководство по установке

Страница: 89 / 130

89
8 Operation
User level Permits fast and simple access to a
selection of up to 25 frequently needed parameters from the
parameter level and the configuration level.
No user level is configured at the factory. The user level must
be configured and loaded into the device with the aid of the
JUMO PC setup program. The "User Level" entry does not
appear in the device menu as long as no user level is config-
ured.
⇨
Chapter 8.2.2 "User level", page 92
Configuration Basic operation of the device inputs and outputs and the de-
vice functions is set here.
⇨
Chapter 10 "Configuration", page 9
Parameteriza-
tion Set date and time
⇨
Chapter 7.2.1 "Date and time", page 68
The setting of controller parameter sets and controller set-
point values is discussed in the operating manual.
⇨
B 202581.0
Functional level Manual operation of certain functions for testing and diag-
nostic purposes (e.g. start wash contact or reset counter)
⇨
Chapter 8.2.3 "Functional level", page 93
Device informa-
tion Information about the device hardware and software, viewing
of current analog and binary values for all device functions,
inputs, and outputs
⇨
Chapter 8.2.4 "Device information", page 95
Service Display and readout of service data for diagnostic purposes,
saving, and loading of a default configuration and perfor-
mance of the basic Ci base calibration for startup of Ci anal-
ysis inputs (inductive conductivity)
⇨
Chapter 8.2.5 "Service", page 96
Calibrate
Touchscreen Calibration of the touchscreen to ensure the reliability and
convenience of touch control
⇨
Chapter 8.2.6 "Calibrating the touchscreen", page 97
Digital sensors Open an overview of all configured digital sensors (Assign-
ment table), check the link status of the sensors and manu-
ally link sensors that are not linked
⇨
Chapter 8.2.7 "Digital sensors", page 97
Device menu
items Description