JUMO AQUIS touch S 202581, Руководство по установке

Страница: 109 / 130

109
8 Operation
• Recorder Backup -> USB: This function is used to back up the recorder
data to prevent data loss .
All measurement data in the ring memory (also data already retrieved) are
transmitted to the flash memory together with their configuration data.
The measurement data are stored in DAT files and the configuration data in
SET files. These files can be opened and evaluated with the aid of the JUMO
PCA3000 evaluation software.
In contrast to Recorder Update, there is no internal marking of recorder data
and no resetting of the available memory display.
The full description of the recording function can be found in the operating man-
ual.
⇨
see B 202581.0
• Device Config. -> USB: The complete, current configuration of the device
is transmitted to the flash drive and saved in a file with the name
"KONF304.SET". If the flash drive already contains a configuration file, a se-
curity prompt appears asking whether you are sure you want to overwrite this
file. Pressing the "OK" button saves the current configuration to the flash
drive and overwrites the previous file.
NOTE!
The "Recorder Update" and "Recorder Backup" functions are
available only if the extra code "Recording" is enabled.
NOTE!
A measuring data recording session is closed by changing configuration data
that are relevant to the data monitor or registration function (e.g. scaling or de-
scription of an analog channel). The measurement data accumulated since the
beginning of the current recording session are stored in the device in a file with
the extension "DAT" together with an additional file with the extension "SET".
A new recording session begins as soon as the new configuration goes into ef-
fect. One DAT file and one SET file are created for each recording session
when recorder data are retrieved via Update or Backup.