EN
32
product is installed. Check before
installation that the door is in good
mechanical condition and correctly
balanced, and that it opens and closes
correctly. Installation and electrical
connection should be carried out in
accordance with local regulations. The
product must only be connected to a
correctly earthed power point.
• Lightweight doors of fibreglass,
aluminium or steel must be reinforced to
avoid damage. It is best to order a
reinforcement set from the door
manufacturer.
• Do not install the product in damp or wet
areas.
• Check after installation that the
mechanism is correctly adjusted and that
the door leaf reverses automatically if it
comes into contact with an object, 100
mm high, placed on the floor. Incorrect
adjustment can result in a risk of serious
personal injury when closing.
• Check every month that the door leaf still
reverses automatically if it comes into
contact with an object, 100 mm high,
placed on the floor. If this does not
happen, adjust and check again until the
reversing works properly. Incorrect
adjustment can result in a risk of serious
personal injury.
• Check after installation that no parts of
the door extend over a public road or
pathway.
• If the product is to be used together with
a recessed wicket door it must be
configured so that the door cannot be
opened when the wicket door is open.
• Check the installation at regular intervals
for wear, damage, and imbalance,
especially the lines, springs and brackets
for the mechanism. Do not use the
product if it is damaged, incorrectly
adjusted or unbalanced – risk of personal
injury.
• Apply the child safety sticker beside the
illuminated control button as a warning
SAFETY INSTRUCTIONS
Read all the instructions and safety
instructions carefully before use and save
them for future reference.
Failure to follow
all the instructions and safety instructions
can result in a risk of personal injury and/or
material damage.
WARNING!
• If the building in which the product is to
be installed does not have any other
entrance doors an external release
mechanism should be installed so that
the garage door can be opened in the
event of a power cut.
• Follow all the instructions and safety
instructions. Incorrect installation can
result in serious personal injury.
IMPORTANT:
Disconnect the drive unit from the power
supply before cleaning, maintenance and/or
replacing parts.
• The product is not intended to be used by
persons (children or adults) with any form
of functional disorders, or by persons who
do not have sufficient experience or
knowledge on how to use it, unless they
have received instructions concerning the
use of the product from someone who is
responsible for their safety.
• Check that the garage door is well
balanced. If the door jams or fastens, it
must be replaced. Garage doors and door
mechanism springs, lines, roller blocks,
brackets and assembly parts are subjected
to severe stain and can result in serious
personal injury. Never attempt to
disconnect, move or adjust them.
Maintenance and repairs must only be
carried out by qualified personnel.
• Do not wear loose-fitting clothing or
jewellery when installing or adjusting the
product.
• All superfluous cables, lines and chains
must be removed and equipment not
necessary to operate the motor must be
disconnected/deactivated before the
Содержание Hard Head 018980
