JUKI SC-956, Инструкция по эксплуатации

Страница: 88 / 185

– 83 –
5-6. List of errors
Error
code
Description of error Cause Item to be checked
E000 Execution of data initial-
ization (This is not an
error.) ・ The existing control box has been
removed and a new one is mount-
ed.
・
In the case the initialization opera-
tion is executed.
This is not a failure.
E007 Motor overload ・ In the case the machine head is
locked.
・ In the case of sewing extra-heavy
weight material that exceeds the
guaranteed material thickness.
・ In the case the motor fails to rotate.
・ In the case of the motor or driver
failure.
・ Check whether the pulley is entangled with
thread.
・ Check whether the motor output connector
(4P) has loosened.
・ Check whether the motor can be turned
smoothly by hand.
E009 Overtime of solenoid
energization ・ In the case the length of solenoid
energizing time has exceeded the
assumed one.
E011 Media is not inserted ・ In the case no media is inserted. ・ Turn the power OFF and check for a media.
E012 Read error ・ In the case data stored on the me-
dia cannot be read.
・ Turn the power OFF and check for a media.
E013 Write error ・ In the case data cannot be written
on the media.
・ Turn the power OFF and check for a media.
E014 Write protect ・ In the case the media is placed in
the write-prohibition state.
・ Turn the power OFF and check for a media.
E015 Format error ・ In the case formatting of the media
cannot be carried out.
・ Turn the power OFF and check for a media.
E016 External media over-ca-
pacity ・ In the case the capacity of media is
not enough.
・ Turn the power OFF and check for a media.
E019 File size over ・ In the case of attempting to read
the custom pitch data or conden-
sation custom data which exceeds
the maximum permissible data size
into the memory of sewing machine
from the USB thumb drive.
・ Turn the power OFF and check the USB
thumb drive.
E022 File undetected ・ In the case of attempting to read a
file which is not stored in the USB
thumb drive into the operation pan-
el.
E024 Continuous sewing time
is exceeded
E032 File compatibility error ・ In the case the file is not compati -
ble.
・ Turn the power OFF and check for a media.
E071 Slip-off of the motor con -
nector
・ In the case the motor connector
has slipped off.
・ Check for looseness and slip-off of the mo -
tor output connector.
E072 Motor overload when the
thread trimmer operates ・ Same as E007. ・ Same as E007.
E079 Overload operation error ・ Load applied to the main shaft
motor is excessively large.
E204 USB insertion ・ In the case the sewing machine
is started up without removing the
USB thumb drive.
・ Remove the USB thumb drive.